A review of solid oxide fuel cell component fabrication methods toward lowering temperature
Z Zakaria, Z Awang Mat… - … Journal of Energy …, 2020 - Wiley Online Library
The solid oxide fuel cells (SOFCs) emerge as an alternative power generation system for
high‐scale stationary application and power plant station. The SOFC consumption leads to …
high‐scale stationary application and power plant station. The SOFC consumption leads to …
A review on the application of magnetron sputtering technologies for solid oxide fuel cell in reduction of the operating temperature
Y Pan, J Wang, Z Lu, R Wang, Z Xu - International Journal of Hydrogen …, 2024 - Elsevier
When considering the commercialization of solid oxide fuel cells (SOFCs), lowering the
operating temperature has become one of the key issues urgently to be solved. Magnetron …
operating temperature has become one of the key issues urgently to be solved. Magnetron …
[HTML][HTML] Mechanism of alteration in passivity of additively manufactured Ni-Fe-Cr Alloy 718 caused by minor carbon variation
Unlike conventional alloys, where carbon content typically promotes carbide compound
formation and reduces localized corrosion resistance, the impact of carbon in additively …
formation and reduces localized corrosion resistance, the impact of carbon in additively …
Improving fuel cell performance via optimal parameters identification through fuzzy logic based-modeling and optimization
Improving the performance of solid oxide fuel cell via maximizing its available peak power
density is a key requirement of research in the field of renewable energy. This could be …
density is a key requirement of research in the field of renewable energy. This could be …
A self-crystallized nanofibrous Ni-GDC anode by magnetron sputtering for low-temperature solid oxide fuel cells
The optimum composition ratio of the anode cermet (Ni-GDC) for solid oxide fuel cells
(SOFCs) varies because the electron-collecting mechanism is different depending on its …
(SOFCs) varies because the electron-collecting mechanism is different depending on its …
High-performance low-temperature solid oxide fuel cell with nanostructured lanthanum strontium cobaltite/yttria-stabilized zirconia cathode via advanced co-sputtering
Recently, there has been a growing interest in developing ultra-fine nanostructured
electrodes with extensive reaction areas for improved performance and low-temperature …
electrodes with extensive reaction areas for improved performance and low-temperature …
Nanoporous nickel thin film anode optimization for low-temperature solid oxide fuel cells
Thin film solid oxide fuel cells (TF–SOFCs) having anode–substrate nanostructure that was
optimized for the low-temperature operation were fabricated. Nickel thin film anodes with …
optimized for the low-temperature operation were fabricated. Nickel thin film anodes with …
Tailoring 3D structured nanofibrous nickel/gadolinium-doped ceria anodes for high-performance thin-film solid oxide fuel cells
Abstract Solid Oxide Fuel cells (SOFCs) operating at low temperature (450–600° C) have
been investigated in order to achieve rapid on/off, improved long-term stability and a wide …
been investigated in order to achieve rapid on/off, improved long-term stability and a wide …
Effect of Ni–GDC anode thickness by Co-sputtering on the high-performance thin film solid oxide fuel cells on a nanoporous substrate for low-temperature operation
Thin film solid oxide fuel cells (TF–SOFCs) having Ni–GDC anodes with different
thicknesses of (1–5) μm were fabricated on a nanoporous substrate termed anodic …
thicknesses of (1–5) μm were fabricated on a nanoporous substrate termed anodic …
High performance, enhanced structural stability of co-sputtered nanocomposite anode with neutral stress state for low-temperature solid oxide fuel cells
All-thin film solid oxide cells (ATF-SOCs) have exhibited exceptional performance at a wide
range of operating conditions. However, despite the significant attention given to …
range of operating conditions. However, despite the significant attention given to …