Influence of boron content on the microstructure and tribological properties of Cr-BN coatings in water lubrication

Q Ma, F Zhou, S Gao, Z Wu, Q Wang, K Chen… - Applied Surface …, 2016 - Elsevier
Cr-BN coatings with different boron contents were deposited on Si (1 0 0) wafers and 316 L
stainless steels using unbalanced magnetron sputtering system by way of adjusting the CrB …

An investigation on the crack resistance of CrN, CrBN and CrTiBN coatings via nanoindentation

Q Wang, F Zhou, Z Zhou, LKY Li, J Yan - Vacuum, 2017 - Elsevier
This study is to pinpoint the effect of B doping and Ti-B co-doping on the crack resistance of
CrN coating via nanoindentation. X-ray photoelectron spectroscopy (XPS) indicated that …

[图书][B] Thin films and coatings: Toughening and toughness characterization

S Zhang - 2015 - books.google.com
Thin Films and Coatings: Toughening and Toughness Characterization captures the latest
developments in the toughening of hard coatings and in the measurement of the toughness …

Advanced hard coatings with enhanced toughness and resistance to cracking

J Musil - Thin Films and Coatings: Toughening and Toughness …, 2015 - books.google.com
Nanocomposite coatings represent a new generation of materials [1–41] and references
therein. They are composed of at least two separated phases with nanocrystalline (nc-) …

Influences of target poisoning on the mechanical properties of TiCrBN thin films grown by a superimposed high power impulse and medium-frequency magnetron …

CY Lu, W Diyatmika, BS Lou, YC Lu, JG Duh… - Surface and Coatings …, 2017 - Elsevier
Five TiCrBN coatings have been successfully fabricated by adopting hybrid co-deposition
and superimposition concepts into high power impulse magnetron sputtering. The medium …

Influence of modulation period and modulation ratio on structure and mechanical properties of TiBN/CrN coatings deposited by multi-arc ion plating

SY Zhou, SJ Yan, B Han, B Yang, BZ Lin… - Applied Surface …, 2015 - Elsevier
TiBN/CrN multilayered superlattice coatings with modulation periods Λ (bilayer thickness)
ranging from 22.5 to 4.2 nm and modulation ratio R (the thickness ratio of CrN and TiBN …

The toughness evaluation of CrBN coatings doped with Ni or Cu by experiment and FEM

Q Wang, M Zhou, F Zhou, Z Zhou, X Jin - Applied Surface Science, 2022 - Elsevier
By adjusting the current of NiCr or Cu target (0.4–2.0 A), the CrBN-Ni and CrBN-Cu coatings
with different Ni (4.35–19.62 at.%) or Cu contents (3.7–19.06 at.%) were deposited to …

Effect of boron concentration on the mechanical, tribological and corrosion properties of Ta–B–N films by reactive magnetron sputtering

I Asempah, J Xu, L Yu, L Wang - Ceramics International, 2019 - Elsevier
A practical design approach in improving the mechanical and corrosion characteristics of
nitride-based films is by the synthesis of nanocomposites, and we have fabricated tantalum …

Comparison of tribological properties of CrN, CrTiN and CrTiBN coatings sliding against SiC and SUS440C balls in water

F Zhou, Q Ma, M Zhang - Applied Physics A, 2020 - Springer
Abstract CrN, CrTiN and CrTiBN coatings were deposited on Si (100) and 316L stainless
steel substrates by unbalanced magnetron sputtering system, and their microstructures …

Superimposition of high power impulse and middle frequency magnetron sputtering for fabrication of CrTiBN multicomponent hard coatings

CY Lu, W Diyatmika, BS Lou, JW Lee - Surface and Coatings Technology, 2018 - Elsevier
The combination of superimposition and hybrid target powers using a superimposed high
power impulse magnetron sputtering (HiPIMS) power and middle-frequency (MF) power …