Liquid metal dealloying, a method of etching based on different solubilities of each
component of the alloy into the liquid metal, has been extensively developed for …

An attempt was made to synthesize aluminum alloy (AA) 7075 matrix reinforced with 0, 1, 3,
5 wt% Al2O3 particulates by using stir casting technique. Mechanical properties and wear …

Tisingle bondCu coatings with controlled copper release and nano-porous structures were
fabricated as biocompatible, blood-contacting interfaces through a two-step process. Initially …

Copper foams are fabricated by directional freezing of aqueous suspensions of nanometric
CuO powders followed by ice sublimation, reduction to Cu in Ar–5% H 2 gas and sintering …

Liquid metal dealloying is a newly available technology used to create bulk porous
materials. In this study, a commercial nickel-based superalloy, Incoloy 800, was dealloyed to …

This work focuses on studying the effect of bath chemical composition, applied current and
deposition time on the morphology, composition and corrosion characterization of the …

Most previously proposed methods for the manufacture of dealloyed nanoporous copper
(Cu) could not be realized for practical applications, due to their poor mechanical properties …

This study investigated the effects of the manufacturing process on the microstructure of
nanoporous copper (NPC) produced using cold-rolled Mn–30 at.% Cu and Mn–40 at.% Cu …

Nanoporous Cu foams having various pores and strut size were fabricated by chemical
dealloying process with Al-Cu precursors. Microstructural evolution of three-dimensional …

Cu nanofoams are promising materials for a variety of applications, including anodes in high-
performance lithium-ion batteries. The high specific surface area of these materials supports …