Argon ion sputtering bridging plasma nitriding and GLC film deposition: effects on the mechanical and tribological properties
A duplex coating consisting of a nitrided layer and a GLC (Graphite-like carbon) film was
deposited on the surface of the M50NiL steel via a one-step process in a plasma nitriding …
deposited on the surface of the M50NiL steel via a one-step process in a plasma nitriding …
Significant texture and wear resistance improvement of TiN coatings using pulsed DC magnetron sputtering
Titanium nitride (TiN) coatings fabricated through reactive sputtering feature a suite of
parameters capable of altering the microstructure and properties. Here, we explore the …
parameters capable of altering the microstructure and properties. Here, we explore the …
Enhancing the adhesion strength and wear resistance of nanostructured NiCrN coatings
NiCrN coatings, with varying Ni contents, were deposited on AISI M2 tool steel substrates
using closed field unbalanced magnetron sputtering ion plating (CFUMSIP) where the NiCr …
using closed field unbalanced magnetron sputtering ion plating (CFUMSIP) where the NiCr …
Influence of substrate bias on the scratch, wear and indentation response of TiSiN nanocomposite coatings
TiSiN coatings were synthesised onto AISI M42 tool steel substrates via closed field
unbalanced magnetron sputtering ion plating, using bias voltages of− 40 and− 50 V. The …
unbalanced magnetron sputtering ion plating, using bias voltages of− 40 and− 50 V. The …
Influences of tribological and mechanical properties of (Ti/Al) N and diamond like carbon coated tungsten carbide tool on machining and dynamic stability in micro …
In this article, the performances of thin-film PVD coated tools of similar chemical
compositions such as TiAlN and TiN, and dissimilar chemical compositions like diamond like …
compositions such as TiAlN and TiN, and dissimilar chemical compositions like diamond like …
Microstructure and tribological behaviors of MoN-Cu nanocomposite coatings sliding against Si3N4 ball under dry and oil-lubricated conditions
X Xu, F Su, Z Li - Wear, 2019 - Elsevier
Abstract MoN and MoN-Cu coatings were deposited on the substrates of 304 stainless steel
using direct current (DC) magnetron sputtering. The chemical composition and …
using direct current (DC) magnetron sputtering. The chemical composition and …
Surface modification of AISI H13 steel by die-sinking electrical discharge machining and TiAlN coating: A promising hybrid technique to improve wear resistance
Hybrid systems consisting of nitriding by die-sinking electrical discharge machining and
subsequent titanium aluminum nitride (TiAlN) coating were produced on annealed AISI H13 …
subsequent titanium aluminum nitride (TiAlN) coating were produced on annealed AISI H13 …
Dynamic response characteristics and damage mechanism of impact wear for deep plasma nitrided layer
The impact wear behaviour of deep plasma nitrided layer and its substrate (axle steel) were
investigated. The nitrided layer had a 6 µm thick compound layer, and the effective case …
investigated. The nitrided layer had a 6 µm thick compound layer, and the effective case …
Frictional and wear performance of TiAlN/TiN coated tool against high-strength steel
G Zheng, G Zhao, X Cheng, R Xu, J Zhao… - Ceramics International, 2018 - Elsevier
The sliding friction and high-speed turning experiments were carried out in dry conditions to
reveal the anti-friction characteristics and wear mechanisms of the TiAlN/TiN coated tool …
reveal the anti-friction characteristics and wear mechanisms of the TiAlN/TiN coated tool …
Analysis of the tribological evolution of nitride-based coatings
CO Ortiz, E Hernandez-Rengifo… - Tribology of Machine …, 2022 - books.google.com
This chapter describes the fundamental and technological role of nitride-based hard
coatings as protective coatings in some applications within the metalworking industry. For …
coatings as protective coatings in some applications within the metalworking industry. For …