Mechanical and chemical recycling of solid plastic waste
This review presents a comprehensive description of the current pathways for recycling of
polymers, via both mechanical and chemical recycling. The principles of these recycling …
polymers, via both mechanical and chemical recycling. The principles of these recycling …
Morphological, interfacial and rheological properties in multilayer polymers: A review
The global market of multilayer polymer (MLP) films accounted for $5.50 billion in 2017 and
is expected to reach $9.58 billion by 2026. In this paper, a comprehensive review on …
is expected to reach $9.58 billion by 2026. In this paper, a comprehensive review on …
Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites
Y Zhou, L Lei, B Yang, J Li, J Ren - Polymer Testing, 2018 - Elsevier
Polylactic acid (PLA) was modified with poly (butylene adipate-co-terephthalate)(PBAT) and
carbon nanotubes (CNTs-COOH) with carboxyl groups by using the melt blending …
carbon nanotubes (CNTs-COOH) with carboxyl groups by using the melt blending …
Mechanical and thermal characteristics of high density polyethylene–fly ash cenospheres composites
MV Deepthi, M Sharma, RRN Sailaja, P Anantha… - Materials & Design, 2010 - Elsevier
Fly ash Cenospheres was used as reinforcing filler in High density polyethylene (HDPE) to
develop lightweight composites. Cenospheres are inert hollow silicate spheres …
develop lightweight composites. Cenospheres are inert hollow silicate spheres …
Preparation and properties of banana fiber-reinforced composites based on high density polyethylene (HDPE)/Nylon-6 blends
Banana fiber (BaF)-filled composites based on high density polyethylene (HDPE)/Nylon-6
blends were prepared via a two-step extrusion method. Maleic anhydride grafted …
blends were prepared via a two-step extrusion method. Maleic anhydride grafted …
Synthesis and characterization of TPO–PLA copolymer and its behavior as compatibilizer for PLA/TPO blends
CH Ho, CH Wang, CI Lin, YD Lee - Polymer, 2008 - Elsevier
A thermoplastic polyolefin elastomer-graft-polylactide (TPO–PLA) was prepared by grafting
polylactide onto maleic anhydride-functionalized TPO (TPO–MAH) in the presence of 4 …
polylactide onto maleic anhydride-functionalized TPO (TPO–MAH) in the presence of 4 …
Graft copolymers of maleic anhydride and its isostructural analogues: high performance engineering materials
ZMO Rzayev - arXiv preprint arXiv:1105.1260, 2011 - arxiv.org
This review summarizes the main advances published over the last 15 years outlining the
different methods of grafting, including reactive extruder systems, surface modification …
different methods of grafting, including reactive extruder systems, surface modification …
Preparation and characterization of compatible thermoplastic starch/polyethylene blends
W Shujun, Y Jiugao, Y Jinglin - Polymer Degradation and Stability, 2005 - Elsevier
Compatible thermoplastic starch (TPS)/linear low density polyethylene (LLDPE) blends were
prepared by one-step reactive extrusion in a single-screw extruder and characterized by …
prepared by one-step reactive extrusion in a single-screw extruder and characterized by …
Poly(L‐lactide)/polypropylene blends: Evaluation of mechanical, thermal, and morphological characteristics
Abstract Poly (llactide)(PLA) was blended with polypropylene (PP) at various ratios (PLA:
PP= 90: 10, 80: 20, 70: 30, and 50: 50) with a melt‐blending technique in an attempt to …
PP= 90: 10, 80: 20, 70: 30, and 50: 50) with a melt‐blending technique in an attempt to …
Crystallization, structures, and properties of different polyolefins with similar grafting degree of maleic anhydride
Y Wang, Y Shi, W Shao, Y Ren, W Dong, F Zhang… - Polymers, 2020 - mdpi.com
Maleic anhydride (MAH) grafting to different polyolefins with similar grafting degree can
have different effects on crystallization, crystal structure, and mechanical and thermal …
have different effects on crystallization, crystal structure, and mechanical and thermal …