Synthesis and characterization of zinc ferrite nanoparticles by a thermal treatment method
Crystalline zinc ferrite (ZnFe 2 O 4) was prepared by the thermal treatment method, followed
by calcination at various temperatures from 723 to 873 K. Poly (vinyl pyrrolidon)(PVP) was …
by calcination at various temperatures from 723 to 873 K. Poly (vinyl pyrrolidon)(PVP) was …
Synthesis and characterization of manganese ferrite nanoparticles by thermal treatment method
Cubic structured manganese ferrite nanoparticles were synthesized by a thermal treatment
method followed by calcination at various temperatures from 723 to 873K. In this …
method followed by calcination at various temperatures from 723 to 873K. In this …
Synthesis and characterization of polyaniline–Fe3O4 nanocomposite: Electrical conductivity, magnetic, electrochemical studies
SS Umare, BH Shambharkar, RS Ningthoujam - Synthetic Metals, 2010 - Elsevier
Fe3O4 nanoparticles were prepared by hydrolysis reaction of urea in ethylene glycol as
solvent at 160° C. The prepared Fe3O4 nanoparticles were incorporated into polyaniline …
solvent at 160° C. The prepared Fe3O4 nanoparticles were incorporated into polyaniline …
Synthesis and characterization of NiFe2O4 magnetic nanoparticles by combustion method
M Kooti, AN Sedeh - Journal of Materials Science & Technology, 2013 - Elsevier
Magnetic nanoparticles of nickel ferrite (NiFe2O4) have been successfully synthesized by
microwave-assisted combustion method using stable ferric and nickel salts as precursors …
microwave-assisted combustion method using stable ferric and nickel salts as precursors …
Synthesis of superparamagnetic bare Fe3O4 nanostructures and core/shell (Fe3O4/alginate) nanocomposites
In this article we report about the synthesis of superparamagnetic bare Fe3O4
nanostructures and core/shell (Fe3O4/alginate) nanocomposites by simple low-temperature …
nanostructures and core/shell (Fe3O4/alginate) nanocomposites by simple low-temperature …
Structural, magnetic, electrical and electrochemical properties of NiFe2O4 synthesized by the molten salt technique
Submicron-sized NiFe2O4 particles were synthesized by the molten salt method at 900° C
using binary melts of a NaCl and KCl mixture that acts as a flux. The X-ray diffraction pattern …
using binary melts of a NaCl and KCl mixture that acts as a flux. The X-ray diffraction pattern …
Comprehensive study of MFe2O4 (M= Co, Ni, Zn) nanostructures prepared by Co-precipitation route
KV Chandekar, SP Yadav - Journal of Alloys and Compounds, 2023 - Elsevier
The phase analysis and average crystallite size of 11.8, 3.1, and 24.7 nm for MFe 2 O 4 (M=
Co, Ni, Zn) nanoparticles (NPs) were analyzed by X-ray diffraction (XRD) patterns …
Co, Ni, Zn) nanoparticles (NPs) were analyzed by X-ray diffraction (XRD) patterns …
Design and fabrication of cobalt and nickel ferrites based flexible electrodes for high-performance energy storage applications
In this work, to enhance supercapacitor research performance, we have prepared two
different types of ferrites as CoFe 2 O 4 and NiFe 2 O 4 nanoparticles by two different routes …
different types of ferrites as CoFe 2 O 4 and NiFe 2 O 4 nanoparticles by two different routes …
Increase in stability of cellulase immobilized on functionalized magnetic nanospheres
W Zhang, J Qiu, H Feng, L Zang, E Sakai - Journal of Magnetism and …, 2015 - Elsevier
Functionalized magnetic nanospheres were prepared by co-condensation of
tetraethylorthosilicate with three different amino-silanes: 3-(2-aminoethylamino propyl) …
tetraethylorthosilicate with three different amino-silanes: 3-(2-aminoethylamino propyl) …
Effect of cobalt doping on crystallinity, stability, magnetic and optical properties of magnetic iron oxide nano-particles
This paper is dedicated to investigate the effect of Co 2+ ions in magnetite Fe 3 O 4 nano-
particles with stoichiometric formula Co x Fe 3-x O 4 where (x= 0, 0.05, 0.1 and 0.15) …
particles with stoichiometric formula Co x Fe 3-x O 4 where (x= 0, 0.05, 0.1 and 0.15) …