[HTML][HTML] Production, characteristics, and utilization of rice husk ash in alkali activated materials: An overview of fresh and hardened state properties
Vast amounts of rice husk ash (RHA) are generated annually, with most of them unutilized or
disposed to landfills, resulting in serious environmental degradation. To avoid this, the use …
disposed to landfills, resulting in serious environmental degradation. To avoid this, the use …
Reaction mechanisms of alkali-activated materials
The Alkali-Activated Materials (AAM) are defined as materials obtained through the reaction
between precursors and activators, and are separated into two classes depending on the …
between precursors and activators, and are separated into two classes depending on the …
Fresh, strength and microstructure properties of geopolymer concrete incorporating lime and silica fume as replacement of fly ash
The need to cure fly ash-based geopolymer at elevated temperatures has limited the
practicability and sustainability of the composite. Hence, there is an imminent need to find …
practicability and sustainability of the composite. Hence, there is an imminent need to find …
Lateritic soils based geopolymer materials: A review
Lateritic soils are abundant materials available around the tropical and sub-tropical areas in
the world. However, due to their chemical and mineralogical complexity, their use in …
the world. However, due to their chemical and mineralogical complexity, their use in …
Improvement in fresh, mechanical and microstructural properties of fly ash-blast furnace slag based geopolymer concrete by addition of nano and micro silica
In this study, the effect of nano-silica (NS) and silica fume (SF) on workability, setting time,
compressive strength and microstructural properties of fly ash-ground granulated blast …
compressive strength and microstructural properties of fly ash-ground granulated blast …
Mechanical and physical properties of inorganic polymer cement made of iron-rich laterite and lateritic clay: A comparative study
In this work, two different laterites (iron contents of 13.07 and 49.34 wt%, respectively, for
lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600° C. The …
lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600° C. The …
Characterization and performance evaluation of laterite based geopolymer binder cured at different temperatures
This paper presents the results of experimental evaluation of curing conditions on the
microstructure and performance of geopolymer binders developed from iron-rich laterite …
microstructure and performance of geopolymer binders developed from iron-rich laterite …
Influence of micro Fe2O3 and MgO on the physical and mechanical properties of the zeolite and kaolin based geopolymer mortar
Geopolymer binders can be used as a sustainable alternative to Portland cement. Despite
the extensive research regarding the influence of different parameters on the properties of …
the extensive research regarding the influence of different parameters on the properties of …
[HTML][HTML] Mineralogical evolution of raw materials transformed to geopolymer materials: A review
The geopolymerization reaction is a chemical process involving the dissolution of
amorphous, semi-crystalline and crystalline phases following alkaline or acid attack at …
amorphous, semi-crystalline and crystalline phases following alkaline or acid attack at …
Synergetic effect of rice husk ash and quartz sand on microstructural and physical properties of laterite clay based geopolymer
Geopolymers were developed in this study by using locally available laterite soil as the
aluminosilicate precursor. Rice husk ash (RHA) which is an agricultural waste was …
aluminosilicate precursor. Rice husk ash (RHA) which is an agricultural waste was …