An extended approach to determine Hildebrand solubility parameter (HISP) of pure 1-
alkanols by precise calculation of the isothermal compressibility coefficient and heat …

Tantalum bulk were implanted with nitrogen ions at different dose of 1× 1 0 1 7 ions/cm2 to 1
0× 1 0 1 7 ions/cm2 and at a energy 30 keV. The implanted samples were characterized …

In the last decades an important number of research papers published on nano chip
electrode and cathode electrochromic materials. Tantalum (Ta) with so high melting point …

Tantalum (Ta) with so high melting point can be a immeasurable candidate for the future of
nanochip devices. However, its surface has not enough trap centers and occupation states …

Numerical simulation of laser-MIG hybrid welded Q235 steel was conducted using finite
element simulation software with a 3D model. The thermal analysis was performed with a …

In this paper, the effect of ion type has been considered to study transport through the
structures in which their interfaces have been produced by the ion implantation process. The …

In this work, the influence of bias voltage on the structure, composition and physical
properties of TiCrN-Mo 2 N-Ni arc Physical Vapor Deposition (arc-PVD) coatings were …

In this article, the effect of ion type on the transport properties of the structures whose
common phases were created by the tantalum-based ion bombardment process has been …

In this article, the effect of ion type on the transport properties of the structures whose
common phases were created by the tantalum-based ion bombardment process has been …

در این مقاله، اثر نوع یون بر خصوصیات ترابردی از میان ساختارهایی که فصول مشترک آنها توسط
فرآیند بمباران یون بر پایه تانتالوم ایجاد گردیده، بررسی شده است. یون نیتروژن استفاده شده …‎