Currently, the service temperature of the MCrAlX coating (M= Ni, Co, or NiCo; X= minor
elements such as Y, Ce, Si, Ta) either as an overlay or as a bondcoat in some critical …

Rapid transmission of infectious microorganisms such as viruses and bacteria through
person-to-person contact has contributed significantly to global health issues. The high …

Thermal barrier coating (TBC) systems are widely used to prolong the lifetime of hot section
components in gas turbines. Oxidation degradation at high temperature is inevitable despite …

A promising new bond coat using CuAlNiCrFe high-entropy alloy was proposed in this
paper. The difference in pre-oxidation conditions between the traditional thermal-sprayed …

The carbide phase in the coating can enhance the wear resistance, corrosion resistance,
heat resistance, and oxidation resistance of the coating. Because the carbide-based coating …

In this study, HVOF spraying technology was employed to deposit the Ni–Mo alloy coating
on nodular cast iron substrate. Post–spray annealing treatment was used to modify the …

The low-diluted NiCoCrAlFeY high entropy bond coating is prepared by high-speed laser
cladding (HSLC). Investigation shows it exhibits excellent high temperature oxidation …

Two MCrAlY coatings with micro/nanostructure were deposited by high velocity oxygen-fuel
(HVOF) spraying method. The microstructure modification of the feedstock powder was …

Super 13Cr martensitic stainless steel (UNS S41426, S13Cr MSS in the case) developed for
gas fields is being applied more broadly. However, the stress corrosion cracking induced by …

The increased operating temperatures of next-generation gas turbines require high-
performance coatings with improved oxidation resistance. NiCoCrAlY coatings have …