[HTML][HTML] Infrared thermography in the built environment: A multi-scale review
The paper presents a review on major contributions in infrared thermography to study the
built environment at multiple scales. To elaborate the review, hundreds of studies conducted …
built environment at multiple scales. To elaborate the review, hundreds of studies conducted …
UAV photogrammetry, infrared thermography and GPR for enhancing structural and material degradation evaluation of the Roman masonry bridge of Ponte Lucano in …
This paper presents a case study regarding the cooperative use of non-destructive
contactless diagnostic investigations as a tool to aid and assist the degradation evaluation of …
contactless diagnostic investigations as a tool to aid and assist the degradation evaluation of …
Thermal-based analysis for the automatic detection and characterization of thermal bridges in buildings
There are several techniques for the performance of energy studies in buildings, where
infrared thermography is widely used for the study of the composition of the envelopes, to …
infrared thermography is widely used for the study of the composition of the envelopes, to …
As-is 3D thermal modeling for existing building envelopes using a hybrid LIDAR system
This paper introduces a hybrid method for rapidly measuring thermal data and three-
dimensional (3D) geometries of buildings, allowing “virtual” representations of the energy …
dimensional (3D) geometries of buildings, allowing “virtual” representations of the energy …
Passive thermographic detection of moisture problems in façades with adhered ceramic cladding
Adhered ceramic façade claddings are susceptible to defects, of which increasing moisture
content is one of the causes, and infrared thermography can be used to detect this …
content is one of the causes, and infrared thermography can be used to detect this …
Automation of thermographic 3D modelling through image fusion and image matching techniques
Infrared thermography has proved to be an adequate technique for building inspection, as it
can be used to determine energy efficiency and also to detect defects in construction …
can be used to determine energy efficiency and also to detect defects in construction …
Energy efficiency studies through 3D laser scanning and thermographic technologies
Infrared thermography is generally used in energy efficiency studies in buildings, as well as
in moisture detection studies and building inspections for heat losses. Commonly …
in moisture detection studies and building inspections for heat losses. Commonly …
Calibration and verification of thermographic cameras for geometric measurements
Infrared thermography is a technique with an increasing degree of development and
applications. Quality assessment in the measurements performed with the thermal cameras …
applications. Quality assessment in the measurements performed with the thermal cameras …
Techniques for monitoring moisture in walls
SE Pinchin - Studies in Conservation, 2008 - Taylor & Francis
In order to diagnose and treat moisture-related problems in historic buildings, it is necessary
to measure moisture levels in walls. This review describes equipment and procedures for …
to measure moisture levels in walls. This review describes equipment and procedures for …
Estimation of the surface thermal resistances and heat loss by conduction using thermography
BM Marino, N Muñoz, LP Thomas - Applied Thermal Engineering, 2017 - Elsevier
The thermal insulation of a construction is established by the resistances of the materials
employed and the thermal surface resistances, which may vary significantly from one …
employed and the thermal surface resistances, which may vary significantly from one …