Characterization of reverberation chambers for OTA measurements of wireless devices: Physical formulations of channel matrix and new uncertainty formula
The paper deals with reverberation chambers for over-the-air (OTA) testing of wireless
devices for use in multipath. We present a formulation of the S-parameters of a reverberation …
devices for use in multipath. We present a formulation of the S-parameters of a reverberation …
Channel sounding of loaded reverberation chamber for over-the-air testing of wireless devices: Coherence bandwidth versus average mode bandwidth and delay …
This letter finds the relation between different parameters that characterize the reverberation
chamber as a channel emulator for over-the-air (OTA) testing of wireless devices and …
chamber as a channel emulator for over-the-air (OTA) testing of wireless devices and …
Threshold receiver model for throughput of wireless devices with MIMO and frequency diversity measured in reverberation chamber
We present a simple theoretical model for the throughput data rate of a wireless LTE device
including the improvements of data rate due to diversity in frequency (OFDM) and spatial …
including the improvements of data rate due to diversity in frequency (OFDM) and spatial …
Throughput modeling and measurement in an isotropic-scattering reverberation chamber
X Chen - IEEE Transactions on Antennas and Propagation, 2014 - ieeexplore.ieee.org
This paper presents simple throughput models for multiple-input multiple-output orthogonal
frequency division multiplexing (MIMO-OFDM) systems with hybrid automatic repeat request …
frequency division multiplexing (MIMO-OFDM) systems with hybrid automatic repeat request …
Estimation of average Rician K-factor and average mode bandwidth in loaded reverberation chamber
A well-stirred reverberation chamber without noticeable direct coupling between the
transmitting and receiving antennas emulates an isotropic Rayleigh fading environment and …
transmitting and receiving antennas emulates an isotropic Rayleigh fading environment and …
Performance and immunity evaluation of complete WLAN systems in a large reverberation chamber
R Recanatini, F Moglie… - IEEE transactions on …, 2013 - ieeexplore.ieee.org
This paper concerns the use of a large reverberation chamber (RC) to test a wireless local
area network system based on both 802.11 b/g and 802.11 n standards including multiple …
area network system based on both 802.11 b/g and 802.11 n standards including multiple …
Characterization of implemented algorithm for MIMO spatial multiplexing in reverberation chamber
Previously, the throughput for a single-input multiple-output (SIMO) system was successfully
tested in a reverberation chamber (RC), and the results were in good agreement with a …
tested in a reverberation chamber (RC), and the results were in good agreement with a …
Correlation matrix methods to assess the stirring performance of electromagnetic reverberation chambers
The use of correlation matrices to evaluate the number of uncorrelated stirrer positions of
electromagnetic reverberation chambers has widespread applications in electromagnetic …
electromagnetic reverberation chambers has widespread applications in electromagnetic …
Measurements of RFID tag sensitivity in reverberation chamber
JH Rudander, PS Kildal… - IEEE Antennas and …, 2011 - ieeexplore.ieee.org
The reverberation chamber is now commonly accepted and used for fast and accurate
performance evaluation of mobile phones and other wireless devices for in particular new …
performance evaluation of mobile phones and other wireless devices for in particular new …
Focusing gain model of time-reversed signals in dense multipath channels
M Lienard, P Degauque, V Degardin… - IEEE Antennas and …, 2012 - ieeexplore.ieee.org
The time reversal (TR) technique consists of transmitting in the channel a signal filtered by
the time-reversed channel impulse response. To assess the performance of a TR system …
the time-reversed channel impulse response. To assess the performance of a TR system …