Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life
A Vereschaka, A Aksenenko, N Sitnikov… - Tribology …, 2018 - Elsevier
The paper presents the results of the comparative tests of carbide samples with multilayered
nano-structured coatings based on titanium nitrides (Ti-TiN-(Ti, Cr, Al, Si) N) and zirconium …
nano-structured coatings based on titanium nitrides (Ti-TiN-(Ti, Cr, Al, Si) N) and zirconium …
Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater
Y Fu, F Zhou, M Zhang, Q Wang, Z Zhou - Applied Surface Science, 2020 - Elsevier
CrMoSiN coatings containing various molybdenum (Mo) contents were prepared on Si
wafers and titanium alloy substrates using unbalanced magnetron sputtering system via …
wafers and titanium alloy substrates using unbalanced magnetron sputtering system via …
Enhancing the adhesion strength and wear resistance of nanostructured NiCrN coatings
NiCrN coatings, with varying Ni contents, were deposited on AISI M2 tool steel substrates
using closed field unbalanced magnetron sputtering ion plating (CFUMSIP) where the NiCr …
using closed field unbalanced magnetron sputtering ion plating (CFUMSIP) where the NiCr …
Tuning the microstructure, mechanical properties, tribological and electrical contact behavior by Cu doping for gold-based coating
DY Wu, X Zhou, LP Li, CS Ji, X Wang, FS Meng… - Tribology …, 2024 - Elsevier
The copper phase is induced into gold coating to form nano-composition structure, which not
only improves mechanical properties and wear resistance, but also remains low contact …
only improves mechanical properties and wear resistance, but also remains low contact …
The enhancement of individual friction and corrosion properties of CrSiN coatings by Mo doping in seawater
Y Fu, F Zhou, M Zhang - Surface and Coatings Technology, 2022 - Elsevier
A series of CrSiN coating with various Mo contents were fabricated on Ti6Al4V alloys using
a closed unbalanced magnetron sputtering system and their tribological and …
a closed unbalanced magnetron sputtering system and their tribological and …
Microstructure, mechanical properties and tribological behaviors of gold coating determined by surface quality
DY Wu, X Zhou, LP Li, GF Zhai - Surface and Coatings Technology, 2023 - Elsevier
Gold-plated electrical contacts have been widely applied in engineering due to their
excellent features and the ever-growing interest in microelectronic products. However, gold …
excellent features and the ever-growing interest in microelectronic products. However, gold …
Effect of low-dose Xe20+ ion irradiation on the deformation behavior of the magnetron sputtered Cr coatings under nanoindentation
The magnetron sputtered Cr coatings on zirconium (Zr) alloy substrates were irradiated by
the 5 MeV Xe 20+ ions at room temperature, followed by the studies on microstructure …
the 5 MeV Xe 20+ ions at room temperature, followed by the studies on microstructure …
Fabrication of Cr-Si-N coatings using a hybrid high-power impulse and radio-frequency magnetron co-sputtering: The role of Si incorporation and duty cycle
W Diyatmika, CY Cheng, JW Lee - Surface and Coatings Technology, 2020 - Elsevier
Cr-Si-N thin films were successfully fabricated by a hybrid deposition system containing a
high power impulse magnetron sputtering (HiPIMS) and a radio frequency (RF) magnetron …
high power impulse magnetron sputtering (HiPIMS) and a radio frequency (RF) magnetron …
Effect of hydration reaction on the wear behavior of Fe-based amorphous coating in different wear conditions
S Cui, H Zhai, W Tong, W Li, X Li, X Fan… - Journal of Non-Crystalline …, 2023 - Elsevier
This work utilizes detonation spraying to deposit Fe-based amorphous coating (Fe-based
AC) with a highly dense microstructure on a carbon steel substrate. The electrochemical and …
AC) with a highly dense microstructure on a carbon steel substrate. The electrochemical and …
Tailoring the scratch adhesion strength and wear performance of TiNiN nanocomposite coatings by optimising substrate bias voltage during cathodic arc evaporation
The tribological properties of TiN-based coatings can be substantially influenced by the
choice of substrate bias employed during physical vapor deposition. However, the effects of …
choice of substrate bias employed during physical vapor deposition. However, the effects of …