[HTML][HTML] Improving the phase transition characteristic and latent heat storage efficiency by forming polymer-based shape-stabilized PCM for active latent storage …

D Rahmalina, RA Rahman - Case Studies in Thermal Engineering, 2022 - Elsevier
In this work, form-stabilized PCM (SSPCM) is evaluated for an active latent heat storage
(ALHS) system. High-density polyethylene (HDPE) and styrene-butadiene-styrene (SBS) are …

Thermal stress influence on the long-term performance of fast-charging paraffin-based thermal storage

RA Rahman, AH Lahuri - Thermal Science and Engineering Progress, 2023 - Elsevier
The present study evaluates the impact of charging speeds on the long-term performance of
paraffin-based thermal energy storage (TES) up to 10,000 actual thermal cycles. Paraffin …

Employing bibliometric analysis to identify the trends, evolution, and future research directions of sand-based thermal energy storage systems

F Odoi-Yorke, R Opoku, F Davis, GY Obeng - Journal of Energy Storage, 2024 - Elsevier
Thermal energy storage (TES) systems are pivotal in enabling wider adoption of renewable
energy sources by overcoming their intermittent nature. However, many existing TES …

[HTML][HTML] Preliminary characterization and thermal evaluation of a direct contact cascaded immiscible inorganic salt/high-density polyethylene as moderate temperature …

BM Suyitno, R Anggrainy, N Plamonia, RA Rahman - Results in Materials, 2023 - Elsevier
The present work assesses the direct contact cascaded immiscible phase change material
(PCM) for solar heat storage systems (SHSS) in water heating applications. The direct …

[PDF][PDF] Increasing the charge/discharge rate for phase-change materials by forming hybrid composite paraffin/ash for an effective thermal energy storage system.

BM Suyitno, D Rahmalina, RA Rahman - AIMS Materials Science, 2023 - aimspress.com
Increasing the charge/discharge rate for phase-change materials by forming hybrid composite
paraffin/ash for an effective therma Page 1 AIMS Materials Science, 10(1): 70–85. DOI …

Industrial Waste Heat Utilization in the European Union—An Engineering-Centric Review

V Turek, B Kilkovský, J Daxner, D Babička Fialová… - Energies, 2024 - mdpi.com
The efficient utilization of waste heat from industrial processes can provide a significant
source of energy savings for production plants, as well as be a driver of sustainable …

[HTML][HTML] The optional approach in recycling plastic waste for energy storage application: A detailed evaluation of stabilized–hexadecanoic acid/plastic

RA Rahman, MSKTS Utomo, RDD Putra - Case Studies in Chemical and …, 2024 - Elsevier
This work proposes new approach for recycling plastic to form stabilized-hexadecanoic acid
(SHA) as material thermal storage technology (TST). Surface profile of SHA shows the …

Development of free water knock-out tank by using internal heat exchanger for heavy crude oil

I Ismail, AT Mulyanto, RA Rahman - EUREKA: Physics and …, 2022 - journal.eu-jr.eu
Reactivation of an old oil well can be explicitly calculated to maximize crude oil production.
The biggest challenge with the activation process is the crude oil content in old wells, which …

[HTML][HTML] The impact of thermal aging on the degradation of technical parameter of a dynamic latent thermal storage system

D Rahmalina, RA Rahman - International Journal of Thermofluids, 2023 - Elsevier
A dynamic latent thermal storage (DLTS) system operates at elevated working temperatures
to maximize the operation of the thermal system. It potentially deteriorates the phase change …

The assessment of reflector material durability for concentrated solar power based on environment exposure and accelerated aging test

BM Suyitno, RA Rahman, H Sukma… - … -European Journal of …, 2022 - papers.ssrn.com
The reflector durability is essential to maintain suitable photo-to-thermal conversion in
concentrated solar power plants. The present study evaluates the impact of environmental …