X‐ray tomography is a versatile tool in materials research and engineering since it allows for
a non‐destructive and three‐dimensional mapping of the constituents of a heterogeneous …

The present study was performed on A356 and B319 alloys in mechanically stirred or
degassed condition. Melts were Sr‐modified and grain‐refined. Hydrogen content was …

A comprehensive investigation of the trace additions of in situ novel bimodal-sized (nano
and submicron) TiB 2 particles on the solidification behavior, microstructure and mechanical …

Abstract A hypoeutectic Al–10Si-2.0 Mg ternary alloy with high strength and high ductility
was developed for as-cast service conditions. The effects of eutectic-forming element Mg on …

The microstructures of eutectic Si in Al-7.0 Si-0.3 Mg alloys (in wt.%) without and with 0.4
wt% La at different cooling rates (0.2–130 K/s) were investigated by multi-scale microscopy …

In this work, the effects of cooling rate and the addition of TiC nanoparticles on the as-cast
microstructure, precipitation behavior during subsequent heat treatments and mechanical …

Microporosity in aluminum alloy castings is detrimental to the final mechanical properties
such as fatigue life. Previous studies have shown that alloying additions in sand casting …

Abstract A two-dimensional (2-D) multi-component and multi-phase cellular automaton (CA)
model coupled with the Calphad method and finite difference method (FDM) is proposed to …

The microstructure and tensile property of the hypoeutectic Al-Si alloy with and without
microalloying of Sc and Zr were studied by means of the optical microscope (OM) …

The machinability in turning of Al-Si-Mg alloys under as-cast and heat-treated conditions has
been investigated. Three alloys with 3%, 7% and 12% Si and 0.6% Mg contents (wt%) were …