Carbon dioxide (CO 2) emissions are being reduced using the technique known as CCUS
(Carbon Capture, Utilization, and Storage). At present, cementing cement paste based on …

This paper presents an experimental study on the performance of shielding refractory
concretes containing new types of cements for use in the radiation protection technology …

There have been reports on the strength decrease of CAC-bonded corundum-based
castables without silica fume due to dehydration and decomposition of CAC hydrates when …

One commonly used cement type for thermal applications is CAC containing 38–40%
alumina, although the postheated behavior of this cement subjected to elevated temperature …

Herein, nano-sized α-Al 2 O 3 powders were successfully synthesized at low temperatures
via unidirectional ball milling of Al (OH) 3 and addition of an AlF 3 additive. The effects of the …

The effects of sodium hexametaphosphate (SHMP) addition on the dispersion and hydration
of calcium aluminate cement were investigated, and the relevant mechanisms discussed …

The distribution of in situ CA 6 depends on the amount of the residual calcium aluminate
cement (CAC) anhydrous phase and the distribution of CAC hydrates in CAC-bonded …

Acicular mullite whisker has been broadly applied in refractory materials, and its aspect ratio
is crucial to the properties of refractories. Few studies have focused on the in situ generation …

Calcium aluminate cement (CAC) was ground for 1 and 2 h to investigate the impact of
mechanical grinding on CAC hydration at 30° C and CAC-bonded castable strength. Phase …

This study investigates the strength progression of calcium aluminate cement (CAC)-bonded
castables with a CAC content ranging from 2 to 16 wt% in the temperatures between 300 …