Directional reflectance microscopy (DRM) is a new optical technique that enables grain
orientation mapping in crystalline solids by capturing and analyzing light reflectance signals …

A novel tunnel growth model is proposed to reveal how hydrogen is transported out of
tunnels and explain the phenomena during etching process of aluminum foil for capacitor …

In the present study, various defects such as dislocations were controlled in Ti-V-Al-based
shape memory alloy by thermomechanical treatment and introduction of interstitial oxygen …

Abstract Recently, Al‐batteries (AlBs) have become promising candidates for post‐lithium
batteries, with [EMImCl]: AlCl3 (1: 1.5) as the most commonly used electrolyte. However …

The present study presented the systematic investigations on the influence of Co and Cu on
the corrosion behaviors and wear resistance of Ti–Nb based shape memory alloys. The …

We investigated the effects of additives to the etching solution of 1M hydrochloric acid on the
electrochemical etching behavior for aluminum electrolytic capacitors, using scanning and …

Etching aluminum foil was prepared by electrochemical DC etching under ultrasonic
superimposition. Specifically, the relationship of electrochemical behavior, interface …

The mechanism of corrosion of 99.99% purity aluminum in alkaline solutions was
investigated, through detailed examination of open-circuit potential transients. These …

Hydrous oxide films composed of pseudoboehmite and bayerite have been fabricated on
the aluminium surfaces by hydration pretreatment in hot distilled water and ammonia …

The relationship was explored between nanoscale voids in anodic aluminum oxide films
and the surface condition of aluminum samples prior to anodizing. Transmission electron …