Cold-drawn pearlitic steel wires have attracted considerable interest because of their
excellent combination of strength and ductility. The physical interpretation of these …

The tensile properties and the deformation microstructure of pearlitic steel (0.8 wt% C) have
been quantified in wires drawn to strains in the range from 3.7 to 5.4, having a flow stress in …

Steel tire cord and steel saw wire represent typical precision pearlitic steel wire rods of wire
products; it is a very important solar energy material with a diameter about 50 μm. This paper …

A new double vacuum melting route (conventional second refining+ vacuum arc refining
[CSR+ VAR]) with 33% lower production cost than the traditional VIM+ VAR route has been …

Pearlitic steel wire, with a representative sub-100 nm lamellar structure, is the strongest
mass-produced steel with an excellent combination of formability and strength. This …

The evolution of morphology of pearlite and crystallographic texture of ferrite matrix in fully
pearlitic steels during wire drawing were quantitatively investigated. The study revealed that …

The microstructure evolution and its effects on the mechanical performance of 2000 MPa
bridge cable steel wires were investigated by transmission electron microscope (TEM) …

The viability of single edge cracked sheet test method for rapidly determining the crack
propagation characteristics of steel wires was investigated. First, fatigue tests under 3 …

In this paper, the texture and microstructure evolution of drawn-torsion and drawn-annealing-
torsion ferrite wires are studied by electron back scattering diffraction (EBSD) in order to …

摘要采用电子背散射衍射(EBSD) 技术研究了拉拔过程中珠光体钢丝心部织构演变规律.
结果表明, 经过多道次干拉和淬火处理的钢丝存在强度较小的< 110> 丝织构, 经过湿拉拔后 …