A progress review on soot experiments and modeling in the engine combustion network (ECN)
The 4th Workshop of the Engine Combustion Network (ECN) was held September 5-6, 2015
in Kyoto, Japan. This manuscript presents a summary of the progress in experiments and …
in Kyoto, Japan. This manuscript presents a summary of the progress in experiments and …
Engine combustion network: comparison of spray development, vaporization, and combustion in different combustion vessels
Development and mixing of Diesel sprays are long known to be key factors for combustion
and pollutant emissions but the related measurements in a real engine is not an easy task …
and pollutant emissions but the related measurements in a real engine is not an easy task …
Characterization of Spray A flame structure for parametric variations in ECN constant-volume vessels using chemiluminescence and laser-induced fluorescence
The transient and quasi-steady flame structure of reacting fuel sprays produced by single-
hole injectors has been studied using chemiluminescence imaging and Planar Laser …
hole injectors has been studied using chemiluminescence imaging and Planar Laser …
Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector
In this work, lift-off length and ignition delay have been measured via chemiluminescence
techniques in a wide range of conditions for a single-hole injector from the Engine …
techniques in a wide range of conditions for a single-hole injector from the Engine …
[HTML][HTML] A numerical study on the effect of cavitation erosion in a diesel injector
M Cristofaro, W Edelbauer, P Koukouvinis… - Applied Mathematical …, 2020 - Elsevier
The consequences of geometry alterations in a diesel injector caused by cavitation erosion
are investigated with numerical simulations. The differences in the results between the …
are investigated with numerical simulations. The differences in the results between the …
Diffuse back-illumination setup for high temporally resolved extinction imaging
FR Westlye, K Penney, A Ivarsson, LM Pickett… - Applied …, 2017 - opg.optica.org
This work presents the development of an optical setup for quantitative, high-temporal
resolution line-of-sight extinction imaging in harsh optical environments. The application …
resolution line-of-sight extinction imaging in harsh optical environments. The application …
Internal and near nozzle measurements of Engine Combustion Network “Spray G” gasoline direct injectors
Gasoline direct injection (GDI) sprays are complex multiphase flows. When compared to
multi-hole diesel sprays, the plumes are closely spaced, and the sprays are more likely to …
multi-hole diesel sprays, the plumes are closely spaced, and the sprays are more likely to …
Study of liquid and vapor phase behavior on Diesel sprays for heavy duty engine nozzles
R Payri, J Gimeno, G Bracho, D Vaquerizo - Applied Thermal Engineering, 2016 - Elsevier
A lot of effort has been put in the past years into the understanding of the delivery and
development of diesel sprays in engine-like conditions as it has been proved to be a very …
development of diesel sprays in engine-like conditions as it has been proved to be a very …
Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector
In this paper, lift-off length has been measured via both broadband luminosity and OH
chemiluminescence. In addition, ignition delay has also been measured via broadband …
chemiluminescence. In addition, ignition delay has also been measured via broadband …
String flash-boiling in gasoline direct injection simulations with transient needle motion
A computational study was performed to investigate the influence of transient needle motion
on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations …
on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations …