[HTML][HTML] Constitutive Modelling Analysis and Hot Deformation Process of AISI 8822H Steel
This study used the Gleeble 3800 thermomechanical simulator to examine the hot
deformation characteristics of AISI 8822H steel. The main goal was to understand the alloy's …
deformation characteristics of AISI 8822H steel. The main goal was to understand the alloy's …
Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel
M ElMeligy, T El-Bitar, S Ebied - Journal of Ultrafine Grained and …, 2023 - jufgnsm.ut.ac.ir
The steel alloys of the current study contain 0.3% carbon with different amounts of Cr, and
Mo, in addition to W. The alloys were cast as Y-blocks. Cast slabs with 150x100x35 mm …
Mo, in addition to W. The alloys were cast as Y-blocks. Cast slabs with 150x100x35 mm …
Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel
T El-Bitar, M ElMeligy, W Borek… - Journal of Ultrafine Grained …, 2024 - jufgnsm.ut.ac.ir
The present investigation is dealing with the evolution of simultaneous dynamic and
metadynamic recrystallization (DRX) & (MDRX) phenomena by physical simulation for a 4 …
metadynamic recrystallization (DRX) & (MDRX) phenomena by physical simulation for a 4 …
[PDF][PDF] Creation of fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel.
M El-Meligy, T El-Bitar, S Ebied - Journal of Ultrafine Grained & …, 2023 - journals.ut.ac.ir
The steels of the current study contain 0.3% carbon with different amounts of Cr, and Mo, in
addition to W. The steels were cast as Y-blocks. Cast slabs with 150x100x35 mm …
addition to W. The steels were cast as Y-blocks. Cast slabs with 150x100x35 mm …