Owing to their precedent characteristics, micro gas turbines (MGTs) have been favored as
popular power machinery in plenty of energy systems such as distributed energy systems …

In this study, the operating characteristics of a gas turbine combustor are predicted using
real-time data from industrial gas turbines. The turbine exhaust temperature (TET) and major …

This study reports on the performance of the Ansaldo AE-T100 commercial micro gas turbine
(mGT) when fueled by ammonia-methane blends instead of its design fuel, natural gas. This …

Purpose A combustor design is a particularly important and difficult task in the development
of gas turbine engines. During studies for accurate and easy combustor design, reasonable …

An H-class gas turbine combustor prototype that employs the micro-mixing combustion
technology is first proposed in the current research. It consists of 60 interior jet-in-crossflow …

A novel external combustion-air adjustment method (ECAM) is proposed to control the
reaction zone fuel-air ratio under off-design loads. The combustion-air is redistributed by …

A numerical evaluation was performed to investigate the effects of swirl arrangement (co-
swirling and counter-swirling flows) and coal injection mode (non-, fully-, and partially …

Experimental investigations of the effects of a new gaseous fuel injector on the performance
of a micro gas turbine combustor have been conducted. The new injector which is called …

In this study, artificial neural network (ANN) based on operating data is adjusted to detect
fault operation of large-scale industrial gas turbine. To detect faults, the operating …

The allowable Wobbe index (WI) range proposed by gas turbine companies spans from 0 to
5%. System tuning is required when out-of-range fuel is used. In this study, thermodynamic …