Abstract In this study, Cr/CrN multilayer coatings with different number of bilayers were
deposited on Ti–6Al–4V alloy substrates by an arc ion plating method. Tension–tension …

In many sense, the role of a corrosion film and a surface coating in fatigue crack initiation is
similar. The performance of the TiAlN and TiAlN/CrN PVD coatings in resisting fretting …

Results of investigations of multilayer CrN/CrCN coating–X6CrNiTi18-10 stainless steel
substrate system exposed to cavitation degradation are presented. CrN/CrCN coating with …

Chromium nitride-based coatings are often used in application at high temperature. They
possess high wear and oxidation resistance; however, the friction coefficient is typically very …

The aim of this chapter is to present and discuss the correlations between coating deposition
and properties of physical vapor deposition (PVD) coatings, and the degradation …

Abstract 30NiCrMoV12 quenched and tempered samples were coated with 4 μm of CrN
produced by cathodic arc deposition technique. Micro-blasting treatment was performed on …

The performance of single layer TiAlN and multilayered TiAlN/CrN physical vapour
deposition coatings deposited on AISI P20 steel substrate in affecting overall fatigue …

The aim of this work was the evaluation of the improvement of mechanical properties of a
low-alloyed steel using a duplex treatment (nitriding+ CrN 5μm PVD). The effect on …

The paper presents results of the investigation of the AlCrN and AlCrN+ CrCN coatings,
deposited by arc evaporation method on the austenitic steel substrate. Topography studies …

The high-cycle fatigue properties of graded (Ti, Al) N-and Ti0. 7Al0. 3N-coated
1Cr11Ni2W2MoV at 500° C have been investigated using a rotating bending fatigue testing …