Mechanical properties of extruded Mg-Gd-Y alloys are investigated as a function of rare-
earth content within the high concentration range. The strength is found to change non …

Abstract Electron Beam Melting (EBM) is a powder-bed additive manufacturing technology
enabling the production of complex metallic parts with generally good mechanical …

The complex thermal history imposed by the laser-based powder bed fusion of metals (PBF-
LB/M) process is known to promote the evolution of unique microstructures. In the present …

Abstract Fe-Mn-Si shape memory alloys are materials, whose functional properties strongly
depend on microstructural factors such as grain size and orientation, phase fraction and …

This work demonstrates the tailoring of the microstructure of two FeMnSi-based shape
memory alloys during laser powder bed fusion. Significant variations in the microstructure of …

A novel quenching and partitioning (Q&P) processing was applied to the steel Fe-15Cr-3Ni-
3Mn-0.5 Si-0.12 N-0.16 C (wt.-%) with an almost fully austenitic microstructure in the solution …

The nitrides were added to the molten pool to optimize the microstructure and mechanical
properties of high nitrogen stainless steel weld. The nitrides of the alloy element that …

A novel wire-powder hybrid arc additive manufacturing (WPHAAM) was applied for melting
zone nitridizing to avoid the deterioration effect caused by the loss of nitrogen in high …

By means of a simplified quenching and partitioning (Q&P) processing with quench
temperature equal to room temperature, austenite fractions of 56, 43, and 24 vol% are …

A high alloy CrMnNi TRIP steel has been processed by electron beam melting, a powder-
bed based additive manufacturing (AM) technology, to investigate its fatigue properties. The …