[HTML][HTML] Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community
Since decades, protective hard coatings with thicknesses of a few micrometers are grown by
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
[HTML][HTML] Mechanical properties and thermal stability of reactively sputtered multi-principal-metal Hf-Ta-Ti-V-Zr nitrides
A Kirnbauer, A Kretschmer, CM Koller, T Wojcik… - Surface and coatings …, 2020 - Elsevier
Abstract Crystalline (Hf, Ta, Ti, V, Zr) N nitride thin films, with a high-entropy metal-sublattice,
were synthesized at 440° C by reactive magnetron sputtering using an equimolar Hf-Ta-Ti-V …
were synthesized at 440° C by reactive magnetron sputtering using an equimolar Hf-Ta-Ti-V …
[HTML][HTML] Discovery of Guinier-Preston zone hardening in refractory nitride ceramics
Traditional age hardening mechanisms in refractory ceramics consist of precipitation of fine
particles. These processes are vital for widespread wear-resistant coating applications …
particles. These processes are vital for widespread wear-resistant coating applications …
[HTML][HTML] Towards lowering energy consumption during magnetron sputtering: Benefits of high-mass metal ion irradiation
The quest for lowering energy consumption during thin film growth by magnetron sputtering
techniques becomes of particular importance in view of sustainable development goals. As …
techniques becomes of particular importance in view of sustainable development goals. As …
[HTML][HTML] Energy-efficient physical vapor deposition of dense and hard Ti-Al-WN coatings deposited under industrial conditions
Decreasing the growth temperature to lower energy consumption and enable deposition on
temperature-sensitive substrates during thin film growth by magnetron sputtering is crucial …
temperature-sensitive substrates during thin film growth by magnetron sputtering is crucial …
Mechanical and tribological properties of Ti-Al-Ta-N/TiAl and Ti-Al-Ta-N/Ta multilayer coatings deposited by DC magnetron sputtering
AR Shugurov, ED Kuzminov - Surface and Coatings Technology, 2022 - Elsevier
The mechanical properties, microstructure, adhesion and wear behavior of a Ti 0.41 Al 0.48
Ta 0.11 N monolithic coating and Ti 0.41 Al 0.48 Ta 0.11 N/Ti 0.45 Al 0.55 and Ti 0.41 Al …
Ta 0.11 N monolithic coating and Ti 0.41 Al 0.48 Ta 0.11 N/Ti 0.45 Al 0.55 and Ti 0.41 Al …
The effect of Si content on microstructure and mechanical properties of Ti–Al–Ta–Si–N coatings
AR Shugurov, ED Kuzminov, YA Garanin, AV Panin… - Vacuum, 2023 - Elsevier
The evolution of the microstructure and mechanical properties of magnetron-sputtered Ti 1-
xyz Al x Ta y Si z N coatings with increasing the Si content from z= 0 to 0.3 is studied. Based …
xyz Al x Ta y Si z N coatings with increasing the Si content from z= 0 to 0.3 is studied. Based …
Influence of V addition on the microstructure, mechanical, oxidation and tribological properties of AlCrSiN coatings
R Wang, H Mei, R Li, T Zhang, Q Wang - Surface and Coatings Technology, 2021 - Elsevier
The precise control of composition and out-diffusion/oxidation behavior of V element is the
principal factor for V-containing coatings with superior mechanical and anti-wear properties …
principal factor for V-containing coatings with superior mechanical and anti-wear properties …
Dense, single-phase, hard, and stress-free Ti0.32Al0.63W0.05N films grown by magnetron sputtering with dramatically reduced energy consumption
The quest for lowering energy consumption during thin film growth, as by magnetron
sputtering, becomes of particular importance in view of sustainable development goals. A …
sputtering, becomes of particular importance in view of sustainable development goals. A …
Effect of peak power on microstructure, mechanical and tribological properties of W-Ti-CN (O) ceramic films produced by hybrid sputtering
This research investigates the impact of peak power (from 44 to 105 kW) on the structural
and tribological properties of W-Ti-CN (O) films. Chemical analysis of the coatings, using …
and tribological properties of W-Ti-CN (O) films. Chemical analysis of the coatings, using …