[HTML][HTML] Structural, mechanical and tribological performance of a nano structured biomaterial Co–Cr–Mo alloy synthesized via mechanical alloying
The influence of milling time on the tribological behavior of a Co–Cr–Mo alloy designed for
biomedical applications, synthesized via mechanical alloying is investigated. Elemental Co …
biomedical applications, synthesized via mechanical alloying is investigated. Elemental Co …
New titanium alloys, promising materials for medical devices
Titanium alloys are used in medical devices due to their mechanical properties, but also for
their corrosion resistance. The natural passivation of titanium-based biomaterials, on the …
their corrosion resistance. The natural passivation of titanium-based biomaterials, on the …
Biomimetic deposition of hydroxyapatite layer on titanium alloys
Over the last decade, researchers have been concerned with improving metallic
biomaterials with proper and suitable properties for the human body. Ti-based alloys are …
biomaterials with proper and suitable properties for the human body. Ti-based alloys are …
[PDF][PDF] Biocompatible titanium alloys used in medical applications
At global level, there is a continuing concern for the research and development of alloys for
medical and biomedical applications. Metallic biomaterials are used in various applications …
medical and biomedical applications. Metallic biomaterials are used in various applications …
New Ti–Mo–Si materials for bone prosthesis applications
Several newly obtained titanium alloys were characterized in order to evaluate the
biocompatibility and their possible application as implants. For improvement of the …
biocompatibility and their possible application as implants. For improvement of the …
Microstructural analysis and tribological behavior of Ti-based alloys with a ceramic layer using the thermal spray method
The present article focuses on a recently developed new system of alloys (Ti15MoSi) coated
with ZrO2. The thin coatings deposition of ZrO2 on titanium alloys can be a solution to …
with ZrO2. The thin coatings deposition of ZrO2 on titanium alloys can be a solution to …
In-depth assessment of new Ti-based biocompatible materials
The objective of the research is to obtain Ti20MoxSi (where x= 0, 0.5, 0.75, 1.0 wt%) alloys
using the vacuum arc remelting (VAR) methods and to consider the effects of Mo and Si on …
using the vacuum arc remelting (VAR) methods and to consider the effects of Mo and Si on …
Surface roughness analysis and prediction with an artificial neural network model for dry milling of Co–Cr biomedical alloys
The aim of this paper is to conduct an experimental study in order to obtain a roughness
(Ra) prediction model for dry end-milling (with an AlTiCrSiN PVD-coated tool) of the Co …
(Ra) prediction model for dry end-milling (with an AlTiCrSiN PVD-coated tool) of the Co …
Scratch and Wear behaviour of co-cr-mo alloy in ringer's lactate solution
Cobalt–chromium–molybdenum (Co-Cr-Mo) alloy is a material recommended for biomedical
implants; however, to be suitable for this application, it should have good tribological …
implants; however, to be suitable for this application, it should have good tribological …
High entropy alloys for medical applications
V Geanta, I Voiculescu, P Vizureanu… - Eng. Steels High …, 2020 - books.google.com
A wide variety of metallic biomaterials have been developed so far, including various types
of alloys. However, there is a strong need in the medical field for new solutions in what …
of alloys. However, there is a strong need in the medical field for new solutions in what …