Research on powder-based additive manufacturing of aluminium alloys is rapidly
increasing, and recent breakthroughs in printing of defect-free parts promise substantial …

Exciting metallurgical breakthroughs of the last decades alongside the development and
wide-ranging availability of new and more capable experimental and theoretical tools for …

Abstract The effects of Al (MnFe) Si dispersoids, with different sizes and number densities,
on the evolution of microstructure and ambient/elevated-temperature mechanical properties …

The effects of microalloying with Mg (0–0.23 wt%) on the microstructural evolution and
mechanical properties of Al–Cu 224 cast alloys at ambient and elevated temperatures are …

In this study, the potential applications of Al–Mn–Mg 3004 alloy at elevated temperature
have been evaluated through the systematic study of the precipitation behavior of α-Al …

The hot deformation behaviors of 6082 aluminum alloys containing different Mn contents
(0.05–1.0 wt%) were systematically investigated by uniaxial compression tests in a …

Abstract A cast Al-9Ce-0.75 Mn-0.18 Sc-0.12 Zr (wt%) alloy is designed to combine three
strengthening phases:(i) micron-scale Al 11 Ce 3 platelets formed during eutectic …

Precipitation-strengthening at ambient and high temperatures is examined in Al-0.5 Mn-0.3
Si (at.%) alloys with and without 0.02 at.% Sn micro-additions. Isochronal aging experiments …

Abstract The influence of Mn, Cr and Zr on the creep behavior of an Al–Si–Mg–Cu alloy
intended for Diesel engine applications was studied. Two alloys, base alloy Al–7Si-0.3 Mg …

Abstract Combined microadditions of 0.09 at.% Mo and 0.4 at.% Mn to a dilute Al-0.10 Zr-
0.01 Sc-0.007 Er-0.10 Si (at.%) alloy lead to increases in strength upon peak-aging, and …