Surfactants have been commonly used as corrosion inhibitors for the protection of metallic
materials against corrosion. The amphiphilic nature of surfactant molecules creates an …

In this work, the electrochemical behavior and passivation film characteristics of a TiZrHfNb
multi-principal element alloy (MPEA) with an equal atomic ratio in Cl− solution were studied …

Electrochemical measurements of open circuit potential, linear polarization and
electrochemical impedance spectroscopy (EIS) were utilized to investigate the corrosion …

In this study, the corrosion inhibition performance of steel reinforcement in the simulated
concrete pore solution containing 3.5 wt.% NaCl in the presence of a tailored cationic type of …

The effect of chloride concentration and pre-passivation on the pitting corrosion resistance of
low-alloy steel and conventional low-carbon steel in simulated concrete pore solution was …

Corrosion resistance of high strength steel (HHS) embedded in ultra-high performance
concrete (UHPC) immersed in 3.5% NaCl solution is evaluated in the absence and …

The long-term corrosion behaviour of reinforcing steel embedded in alkali-activated mortars
(AAMs) prepared with three different binder compositions was monitored over a 360-day …

This study aims to investigate the efficiency of active and passive protection of the pre-
corroded steel reinforcement in reinforced concrete (RC) columns using an externally …

Due to different ion types and concentration in pore solution, the passive film on the steel
surface possesses different characteristics in alkali-activated fly ash (AAFA). In this study, the …

In this study, the corrosion behavior of reinforcing steels in concrete under simultaneous
flexural load and chlorides attack was studied by means of linear polarization resistance …