Thermochemical behaviour, solidification, thermal stability and oxidation of Al-Mg2Si composites: An experimental and thermodynamic study
Abstract Effects of Mg and Si (Mg 2 Si) concentration on the thermochemical behaviour,
solidification, thermal stability and oxidation of Al-Mg 2 Si composites have been …
solidification, thermal stability and oxidation of Al-Mg 2 Si composites have been …
Microstructure based numerical simulation of the micromechanics and fracture in hypereutectic Al–Mg2Si composites
In the present study, both experimental and numerical examinations were performed to
understand the hypereutectic Al–Mg 2 Si composite's microstructural morphology …
understand the hypereutectic Al–Mg 2 Si composite's microstructural morphology …
Failures analysis of in-situ Al–Mg2Si composites using actual microstructure based model
Abstract In-situ Al–Mg 2 Si composites (0, 5, 10, 15, 20 wt% Mg 2 Si) were synthesized in an
Al–Mg–Si system through gravity casting route. Influences of the Mg 2 Si addition (in terms of …
Al–Mg–Si system through gravity casting route. Influences of the Mg 2 Si addition (in terms of …
Compressive failure analysis of in-situ Al-Mg2Si composites: Experiment and finite element modelling
Abstract Al-Mg 2 Si composites have been developed through gravity die-casting
techniques. The influence of Mg 2 Si reinforcement concentration on strength …
techniques. The influence of Mg 2 Si reinforcement concentration on strength …
Evaluation of a Cast Al-Mg2Si Composite for Automobile Disk-Brake Rotor Application
This investigation involved the development and characterization (microstructure,
mechanical properties, and dry sliding wear characteristics) of Al-Mg2Si composites for …
mechanical properties, and dry sliding wear characteristics) of Al-Mg2Si composites for …
Effect of TiB2 and Al3Ti on the microstructure, mechanical properties and fracture behaviour of near eutectic Al-12.6Si alloy
Abstract A near eutectic Al-12.6 Si alloy was developed with 0.0 wt%, 2.0 wt%, 4.0 wt%, and
6.0 wt% Al-5Ti-1B master alloy. The microstructural morphology, hardness, tensile strength …
6.0 wt% Al-5Ti-1B master alloy. The microstructural morphology, hardness, tensile strength …
Surface defects formation mechanism of Mg2Si/Al composites by micro cutting
P Ning, J Zhao, S Ji, J Li, H Dai - Precision Engineering, 2024 - Elsevier
Abstract Mg 2 Si/Al composites have wide application prospects in aerospace and
automotive industries. However, many defects often remain on the machined surface after …
automotive industries. However, many defects often remain on the machined surface after …
Comparison of theoretical and experimental physio-mechanical properties of coal-fly ash (CFA) reinforced iron matrix composites
In this work, the effect of coal-fly ash (CFA) reinforcements on the physio-mechanical
properties of iron metal matrix composites (IMMCs) are predicted and compared with the …
properties of iron metal matrix composites (IMMCs) are predicted and compared with the …
Effect of Mn Addition on the Mechanical Properties of Al–12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modification
Abstract Effect of manganese (Mn) addition (0.0, 1.0, 2.0 and 3 wt%) on the microstructural
morphology, hardness, tensile properties and fracture behaviour of the gravity cast eutectic …
morphology, hardness, tensile properties and fracture behaviour of the gravity cast eutectic …
High Temperature and Lubricating Wear Behaviour of In-Situ Al-20Mg2Si Composite
This study investigates the tribological behaviour of Al-20Mg2Si composite having potential
applications in automobiles. A pin-on-disc apparatus was employed to assess its …
applications in automobiles. A pin-on-disc apparatus was employed to assess its …