Titanium alloys are widely used in various areas, particularly in medical and dental
industries, due to their remarkable properties. Still, the optimum cutting conditions for …

Dual face-centered cubic (FCC) CoCrCu 1.2 FeNi semi-solid billets were prepared by
semisolid isothermal treatment of wrought high entropy alloy (HEA)(SSITWH) method, and …

The semi-solid billets of the AZ80-0.2 Y-0.15 Ca magnesium alloy (AZ80M) were fabricated
through the strain-induced melt activation (SIMA) process by hot extrusion and then partial …

The high entropy alloys (HEAs) of dual FCC have great potential for semi-solid processing.
Therefore, at temperatures of 1130–1225° C and strain rates of 0.1–10 s− 1 isothermal …

The coarse grains and rough eutectic microstructure of Al-Ce alloy seriously damage its
performance. In this study, Al-5Ce alloys with fine eutectic fibers and bimodal grain …

Semi-solid processing has unique advantages over traditional forging and casting routines.
However, there is little research of semi-solid processing on nickel-based superalloys. In this …

Liquid-metal dealloying generates porous metals or interpenetrating-phase composites.
Particularly attractive is the use of the alloy's innate melt for activating dealloying throughout …

The enthalpy sensitivity of liquid fraction has been proposed as a novel criterion for
assessing the semi-solid processability. Via experimental analysis and thermodynamic …

The mechanical properties of Ti—Cu alloys processed via thixoforming were evaluated. Ti—
Cu (25, 27, and 29 wt.% Cu) ingots were produced via arc melting, homogenization at 950° …

Uncommon high temperature intragranular acicular ferrite (IAF) transformation was found
and discussed during semi-solid M2 steel cooling processing. The nucleation and growth …