A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered …
A new grain orientation spread approach (GOS≤ 5°) was proposed to study DRX of a Mg-
Zn-Zr alloy during hot deformation. DRXed grains possessed random texture while the …
Zn-Zr alloy during hot deformation. DRXed grains possessed random texture while the …
Biodegradable Magnesium Alloy-Based Composites: Properties, Processing, and Surface Coatings—A Review
Magnesium (Mg) alloys have recently gained massive attention as a biodegradable implant
material. The biocompatibility and high strength–weight ratio make them a competent …
material. The biocompatibility and high strength–weight ratio make them a competent …
Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn
We developed new wrought Mg–2Sn–1Ca wt.%(TX21) and Mg–2Sn–1Ca–2Zn
wt.%(TXZ212) alloys with high strength and ductility simultaneously, produced by …
wt.%(TXZ212) alloys with high strength and ductility simultaneously, produced by …
Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling
W Wang, W Chen, W Zhang, G Cui, E Wang - Materials Science and …, 2018 - Elsevier
ZK60 magnesium alloy sheets with various texture states were successfully fabricated by
controlling the rolling temperature in multi-pass lowered-temperature rolling. The …
controlling the rolling temperature in multi-pass lowered-temperature rolling. The …
Ultrahigh strength Mg-Al-Ca-Mn extrusion alloys with various aluminum contents
Abstract In this work, Mg-(5, 6, 7) Al-3Ca-0.3 Mn (wt.%) alloys were fabricated by permanent
mould direct chill casting followed by indirect extrusion, to achieve ultrahigh strength. The …
mould direct chill casting followed by indirect extrusion, to achieve ultrahigh strength. The …
Improvement of tension/compression asymmetry for high-performance ZK61 magnesium alloy rod via tailoring deformation parameters: Upsetting-extrusion …
WJ Wu, WZ Chen, LX Zhang, XM Chen… - Materials Science and …, 2021 - Elsevier
Upsetting-extrusion (UE) process effectively prepared high-strength ZK61 magnesium alloy
rods with tension/compression symmetry. The influence of upsetting-extrusion temperature …
rods with tension/compression symmetry. The influence of upsetting-extrusion temperature …
The deformation behavior of AZ31 Mg alloy with surface mechanical attrition treatment
X Meng, M Duan, L Luo, D Zhan, B Jin, Y Jin… - Materials Science and …, 2017 - Elsevier
In present work, the deformation behavior of AZ31 Mg alloy with surface mechanical attrition
treatment (SMAT) had been studied. The microstructure and mechanical properties of AZ31 …
treatment (SMAT) had been studied. The microstructure and mechanical properties of AZ31 …
Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy
Hot deformation behavior of as-extruded ZK60 magnesium alloy was investigated using
uniaxial hot compression tests over the temperature range of 300–450° C under strain rates …
uniaxial hot compression tests over the temperature range of 300–450° C under strain rates …
Evolution of microstructure, texture and mechanical properties of ZK60 magnesium alloy in a single rolling pass
W Wang, G Cui, W Zhang, W Chen, E Wang - Materials Science and …, 2018 - Elsevier
The evolution of microstructure and texture in a single rolling pass was investigated at rolling
temperature of 250℃. Based on the analysis of microstructure evolution, thickness reduction …
temperature of 250℃. Based on the analysis of microstructure evolution, thickness reduction …
The effect of twinning and detwinning on the mechanical property of AZ31 extruded magnesium alloy during strain-path changes
In order to investigate the effect of twinning–detwinning on the mechanical properties of
AZ31 extruded magnesium alloy pre-compression and pre-stretch deformation were …
AZ31 extruded magnesium alloy pre-compression and pre-stretch deformation were …