One-component polyurethane adhesives in timber engineering applications: A review
Wood is an attractive, versatile, and sustainable construction material with excellent strength
to weight ratio and a lower carbon footprint than other construction materials. One of the …
to weight ratio and a lower carbon footprint than other construction materials. One of the …
Effect of wood species, clamping pressure and glue spread rate on the bonding properties of cross-laminated timber (CLT) manufactured from tropical hardwoods
The effects of wood species, clamping pressure and glue spread rates on the joint strength
of cross-laminated timber (CLT) manufactured from four tropical hardwood species were …
of cross-laminated timber (CLT) manufactured from four tropical hardwood species were …
Improving impregnation and penetration properties of refractory woods through cryogenic treatment
Cryogenic treatment via liquid nitrogen (LN) was evaluated as a means to improve the
capability of impregnation and penetration in fir and spruce wood. There are a few vital …
capability of impregnation and penetration in fir and spruce wood. There are a few vital …
Microwave-assisted laminated veneer lumber (LVL): Investigation on the effect of preheating time and moisture content on resin penetration and bonding quality
This research presents the effect of microwave preheating and moisture content on phenol-
formaldehyde resin penetration and bonding quality of poplar laminated veneer lumber …
formaldehyde resin penetration and bonding quality of poplar laminated veneer lumber …
Study of properties and mechanism of bonding line in three-layer hybrid cross-laminated timber
M Li, H Ren, Y Wang - Journal of Materials in Civil Engineering, 2022 - ascelibrary.org
The physical and chemical properties of three kinds of laminations relative to the bonding
properties of three-layer hybrid cross-laminated timber (CLT) were studied. The density of …
properties of three-layer hybrid cross-laminated timber (CLT) were studied. The density of …
Bonding strength of some adhesives in heat-treated hornbeam (Carpinus betulus L.) wood used for interior and exterior decoration
Heat-treated wood has an ever-expanding market for exterior and interior applications. The
objective of this study was to determine the effect of a heat treatment on the bonding strength …
objective of this study was to determine the effect of a heat treatment on the bonding strength …
Evaluation of the bonding process and interlaminar shear properties of hybrid cross-laminated timber prepared with larch and OSB
M Li, H Ren - European Journal of Wood and Wood Products, 2024 - Springer
This study explores the application of oriented strand board (OSB) to hybrid cross-laminated
timber (HCLT). OSB and larch were used to fabricate hybrid forms of HCLT for analysis …
timber (HCLT). OSB and larch were used to fabricate hybrid forms of HCLT for analysis …
Characteristics of a protective layer on oil heat-treated scots pine and fir wood
Effects of natural weathering were studied relative to the adhesion strength, surface
hardness, and color change of coated heat-treated and untreated Turkish fir and Scots pine …
hardness, and color change of coated heat-treated and untreated Turkish fir and Scots pine …
The effects of different variables on the screw withdrawal strength of plywood
Aim of study: The purpose of this study is to investigate the effect of the pilot-hole, screw
type, screwing direction, water retention and adhesive on the screw pull resistance of the …
type, screwing direction, water retention and adhesive on the screw pull resistance of the …
[PDF][PDF] Evaluation of screw pulling and flexural strength of bamboo-based oil palm trunk veneer hybrid biocomposites intended for furniture applications
Screw withdrawal and flexural strength were evaluated for Dendrocalamus asper and
Gigantochloa levis bamboo species to explore the possibility of their use as structural …
Gigantochloa levis bamboo species to explore the possibility of their use as structural …