An appropriate fraction of a second phase for controlling the dynamic grain growth of the fine-
grained microstructure during hot deformation can be easily achieved for the high and …

In this study, the influence of building orientation of additively manufactured 316L stainless
steel (SS) welded joints was investigated. Laser powder bed fusion (LPBF) technique was …

The effects of cold rolling routes followed by annealing on the mechanical properties of AISI
316L stainless steel were characterized. Both unidirectional and cross rolling methods were …

The establishment of a constitutive model capable of accurately predicting the flow stresses
for materials in hot-deformation processes can greatly aid in the design and optimization of …

The microstructure, mechanical properties and resistance to hydrogen-assisted degradation
of a medium manganese stainless steel (Fe-0.17 C–10Mn–18Cr–5Ni-0.9 V-0.26 N, in wt.%) …

Since cross rolling promotes the transformation of austenite to deformation-induced α΄-
martensite and increases the dislocation density in the retained austenite, the reversion …

Microstructural evolutions, σ-phase precipitation, and recrystallization kinetics of cold-rolled
AISI 904L stainless steel during annealing were studied in the present work. The …

Austenitic stainless steel (SS) has been seeking a decent strength to match its other
exceptional advantages such as remarkable corrosion resistance, antioxidant activity and …

The solution heat treatment (SHT) is an important step in hot forming and in-die quenching
(HFQ) process. Herein, the SHT of cold-rolled AA7075-H18 alloy sheets is carried out in the …

A novel high-frequency induction technology was successfully developed to carry out ultra-
flash tempering treatment (UFTT) of high-strength carbon steel (HS-CS) with a heating rate …