Role of nano-sized materials as lubricant additives in friction and wear reduction: A review
Nanoparticles acting as additives to improve the tribological performance of base fluids have
attracted much attention in the last several decades to lower wear loss, reduce the frictional …
attracted much attention in the last several decades to lower wear loss, reduce the frictional …
Advances in carbon nanomaterials as lubricants modifiers
I Ali, A Kucherova, N Memetov, T Pasko… - Journal of Molecular …, 2019 - Elsevier
In spite of good development and progress in lubricants, billions US dollars are being lost in
many industries and motor vehicles globally due to engine frictions. Therefore, there is a …
many industries and motor vehicles globally due to engine frictions. Therefore, there is a …
Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel
The tribological behaviour of innovative TiO 2 nano-additive water-based lubricant on ferritic
stainless steel (FSS) 445 was characterised on a ball-on-disk tribometer. Non-oxidised …
stainless steel (FSS) 445 was characterised on a ball-on-disk tribometer. Non-oxidised …
Tribological properties and anti-wear mechanism of ZnO@ graphene core-shell nanoparticles as lubricant additives
B Ren, L Gao, M Li, S Zhang, X Ran - Tribology International, 2020 - Elsevier
Graphene is regarded as a promising, environmentally friendly candidate for lubricant
additives. This work presents a coated nanocomposite with hard-core and soft-shell as …
additives. This work presents a coated nanocomposite with hard-core and soft-shell as …
Enhanced tribological performances of zinc oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil
The major objective of this work was to investigate the tribological performance of zinc
oxide,(ZnO), multiwalled carbon nanotubes (MWCNTs) and ZnO/MWCNTs hybrids as …
oxide,(ZnO), multiwalled carbon nanotubes (MWCNTs) and ZnO/MWCNTs hybrids as …
Tribological properties of oleic acid-modified zinc oxide nanoparticles as the lubricant additive in poly-alpha olefin and diisooctyl sebacate base oils
L Wu, Y Zhang, G Yang, S Zhang, L Yu, P Zhang - Rsc Advances, 2016 - pubs.rsc.org
Oleic acid (OA) modified ZnO nanoparticles with an average size of 4.04 nm were prepared
via a facile in situ one-step route. The as-prepared ZnO nanoparticles were characterized by …
via a facile in situ one-step route. The as-prepared ZnO nanoparticles were characterized by …
Graphite and hybrid nanomaterials as lubricant additives
Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can
reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great …
reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great …
[HTML][HTML] ZnO nanoparticles coated with oleic acid as additives for a polyalphaolefin lubricant
In this work, ZnO nanoparticles (NPs) were successfully synthesized and coated with oleic
acid (OA). The mean diameter of these NPs (ZnO-OA) was around 11.5 nm, their core was …
acid (OA). The mean diameter of these NPs (ZnO-OA) was around 11.5 nm, their core was …
Tribological application of nanocomposite additives in industrial oils
The demand for an improvement in the tribological properties of lubricants used in various
industrial plants, the automotive industry, and other power transmissions has resulted in the …
industrial plants, the automotive industry, and other power transmissions has resulted in the …
A tribological behavior assessment of steel contacting interface lubricated by engine oil introducing layered structural nanomaterials functionalized by oleic acid
Traditional lubricating oil in the lubrication process leads to oil film rupture and lubrication
failure due to thermal instability under high temperatures. Tribological characteristics of …
failure due to thermal instability under high temperatures. Tribological characteristics of …