Polymer-matrix composites are widely used in engineering applications. Yet, environmental
factors impact their macroscale fatigue and creep performances significantly, owing to …

Among the synthetic fibers, glass fibers (GF) are most widely used in thermoplastic short‐
fiber‐reinforced polymers (SFRP), as they offer good strength and stiffness, impact …

Tensile creep behavior of short-carbon-fiber reinforced polyetherimide (SCF/PEI)
composites is investigated at ambient temperature by short and long creep tests in this work …

The effects of annealing time and temperature on the crystallinity of injection‐molded poly
(lactic acid)(PLA) were investigated using differential scanning calorimetry and wide‐angle x …

Buildings with ethylene tetrafluoroethylene (ETFE) foils have attracted considerable
attention due to excellent material properties, good architectural performance and structural …

The creep behavior of bamboo due to the complicated influences of environment and stress
will lead to a sustained increase in deformation, which serious effects the service …

The short-time creep behavior at tensile and single cantilever mode of deformation for a
series of biodegradable composites was thoroughly studied. The composites were based on …

In recent years, composites consisting of polymers and cellulosic materials have attracted
increasing research attention. Polypropylene (PP) is among the most common polymer …

Simultaneous realization of high filler fraction and excellent comprehensive properties
remains a great challenge for extruded wood plastic composites (WPCs). Herein, ultra …

Five groups of three‐point bending tests of wood plastic composites (WPCs) at different
temperatures were conducted. The test temperatures ranged from− 40 to 40° C, and the …