High chromium white irons are ferrous based alloys containing 11–30 wt-% chromium and
1.8–3.6 wt-% carbon, with molybdenum, manganese, copper, and nickel sometimes added …

The effect of the temperature and time of the destabilization and sub-critical heat treatments
on the abrasive wear behaviour of two high-chromium white iron alloys (15-3 Cr Mo and …

The initial as-cast microstructure of a high-chromium (2.35% C, 18.23% Cr) white cast iron
consisting of primary austenitic dendrites and a eutectic mixture of M 7 C 3 …

This investigation compares the results of field tests of plowshares with results from a dry
sand-rubber wheel laboratory abrasion test of selected low-alloy boron steels. After field test …

Flow past a rotating circular cylinder is studied experimentally. The experiments are carried
out in a water tunnel at Reynolds numbers of 200, 300, and 400 and nondimensional …

The present work reports the effect of carbide volume fraction on erosive wear behaviour of
hardfacing cast irons. Five different grades of weld hardfacing cast irons were selected for …

Workroll life of hot rolling mills is strongly affected by roll material. Recently, high-carbon
high speed steel rolls have been developed to improve further work roll life. In this paper …

In this paper, the effect of abrasive particle size on the wear of white cast iron with M3C
carbide and with austenitic and martensitic matrices was investigated. Abrasive wear tests …

Wear resistance is one of the main indicators of the reliability of machine parts. The selection
of wear-resistant material should consider the operational environment and specific types of …

Erosion-corrosion is a major factor contributing to material loss and reduced useful life of
hydro-transport equipment. The combined effect of erosion and corrosion is responsible for …