Abstract Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) is a promising candidate as the solid electrolyte
in energy storage devices. For practical considerations, the most common ways to …

Here we report aluminum-alumina composite coatings fabricated by flame spraying for
potential marine applications against both corrosion and wear. Microstructure examination …

Objective The present study determined the mechanical properties and the wear behavior,
as results of the micro (nano) structure, of the enamel, transition, and dentine layers, which …

Thermal sprayed aluminum (Al) coatings have been extensively utilized for marine
anticorrosion applications. However, lack in mechanical strength of the coatings persists as …

SiO2 glass ceramic has been successfully joined to Ti–6Al–4V alloy with AgCu/Ni composite
interlayer. The brazing temperature varies from 950° C to 980° C, with the holding time …

In this study, we report on a low-temperature sintered enamel coating with a high-strength
bonding and wear-resistance that protected a grey cast iron substrate. The SiO2–Al2O3 …

The thermal conditions for obtaining the glass-ceramic material of Al0. 107B0. 374Mg0.
043Zn0. 282Ca0. 100Si0. 927O3 with a crystalline phase in the form of gahnite (ZnAl2O4) …

The substitution of K+ ion by Ca 2+ or Sr 2+ in K2O–SiO2–MgO–Al2O3–B2O3–MgF2–Li2O–
AlPO4 glass is executed and the relevant effects on crystallization and microstructure are …

Tribological properties of an alumina-added apatite–wollastonite glass–ceramic produced
by controlled heat treatment of a glass in the system MgO–CaO–SiO2–P2O5–Al2O3 have …

In this work, wear behavior and microstructural characterization of porous layers produced in
glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied …