Design and characterization of integrated submillimeter-wave quasi-vertical Schottky diodes

N Alijabbari, MF Bauwens… - IEEE Transactions on …, 2014 - ieeexplore.ieee.org
This work reports on a new approach to realizing vertically oriented Schottky diodes, with
ohmic contact formed directly below the anode, that can be readily integrated into planar …

A W-band GSG probe fabricated by metal additive manufacturing

W Wu, B Liu, P He, X Wen, H Yang… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
In this article, we present a new type of waveguide ground-signal-ground (GSG) probe for
millimeter-wave (mmWave) on-wafer measurements. The proposed design integrates a …

Electronics-based free-space terahertz measurement using hemispherical lens antennas

N Chudpooti, N Duangrit, P Akkaraekthalin… - IEEE …, 2019 - ieeexplore.ieee.org
This paper introduces a novel free-space terahertz (THz) characterization setup featuring an
electronic-based technique and miniature additive-manufactured hemispherical lens …

Importance and requirement of frequency band specific RF probes EM models in sub-THz and THz measurements up to 500 GHz

C Yadav, M Deng, S Fregonese… - IEEE Transactions …, 2020 - ieeexplore.ieee.org
In this letter, we present on-silicon structures on-wafer measurements up to 500 GHz and a
comprehensive electromagnetic (EM) simulation analysis to understand nonideal behavior …

Micromachined probes for submillimeter-wave on-wafer measurements—Part I: Mechanical design and characterization

TJ Reck, L Chen, C Zhang, A Arsenovic… - IEEE Transactions …, 2011 - ieeexplore.ieee.org
The mechanical design and characterization of a micromachined on-wafer probe scalable to
submillimeter-wave frequencies is presented. The design consists of a silicon …

An ultra low-loss silicon-micromachined waveguide filter for D-band telecommunication applications

J Campion, O Glubokov, A Gomez… - 2018 IEEE/MTT-S …, 2018 - ieeexplore.ieee.org
Ahstract-A very low-loss micromachined waveguide bandpass filter for use in D-band (110-
170 GHz) telecommunication applications is presented. The 134-146 GHz filter is …

A 1.1 THz micromachined on-wafer probe

MF Bauwens, N Alijabbari… - 2014 IEEE MTT-S …, 2014 - ieeexplore.ieee.org
This paper presents a micromachined probe for on-wafer measurements of circuits in the
WR-1.0 waveguide band (0.75-1.1 THz). The probe shows a measured insertion loss of less …

Skate, overtravel, and contact force of tilted triangular cantilevers for microcantilever-based MEMS probe technologies

S Arscott - Scientific Reports, 2022 - nature.com
Microfabricated chip-edge microcantilevers are commonly used as surface probes, eg in
near-field microscopy. Such probes normally function in the low-deflection regime, where …

Micromachined silicon-core substrate-integrated waveguides at 220–330 GHz

A Krivovitca, U Shah, O Glubokov… - IEEE Transactions on …, 2020 - ieeexplore.ieee.org
In this article, we present a new technology platform for creating compact and loss-efficient
wafer-scale integrated micromachined substrate-integrated waveguides with silicon-core (Si …

THz characterization and modeling of SiGe HBTs: review

S Fregonese, M Deng, M Cabbia… - IEEE Journal of the …, 2020 - ieeexplore.ieee.org
This article presents a state-of-art review of on-wafer S-parameter characterization of THz
silicon transistors for compact modelling purpose. After, a brief review of calibration/de …