This is a comprehensive, critical, and pedagogical review of volumetric emission
tomography for combustion processes. Many flames that are of interest to scientists and …

The development of diagnostic methods suitable for the monitoring of practical flames is an
important objective, which is receiving a growing attention and significant research efforts …

There is growing interest in the application of renewably-generated NH 3 to support future
energy requirements, however combustor designs and strategies require considerable …

This paper reports on the chemiluminescence footprint of premixed ammonia-methane-air
flames. The chemiluminescence spectrum of laminar twin-flames stabilized with a …

Time resolved 3D measurements are required to further the understanding of turbulent
combustion and to support the development of advanced simulation techniques such as …

OH* chemiluminescence is one of the major spontaneous emission in flames, and often
applied in combustion diagnostics to indicate flame structure, strain rate, equivalence ratio …

Computed Tomography of Chemiluminescence (CTC) is a diagnostic technique that
provides instantaneous 3-D information on flame geometry and excited species …

Chemiluminescence has been observed since the beginning of spectroscopy, nevertheless,
important facts still remain unknown. Especially, reaction pathways leading to …

Even though the unscavenged prechamber has been extensively applied in lean premixed
natural gas engines, the limited understanding of the fundamentals and the lack of predictive …

The study examines chemiluminescence measurements and computations as a method of
validation. Because chemiluminescent radicals are present in small concentrations and …