Under inducing of acetic acid, Perylene imide (PDI) were successfully self-assembled
through strong π-π stacking with the form of face-to-face. The structure of bismuth-rich Bi 5 O …

Bismuth vanadate (BiVO4) is a widely studied oxide in solar water splitting, known for its
ease of synthesis, high charge extraction yields, and advantageous band alignment with …

The use of galvanic cells to determine the thermodynamic properties of metallic or ceramic
materials from electromotive force (emf) measurements is described. Two basic types of the …

Oxygen control technology has been successfully applied in liquid lead and lead–bismuth
coolant systems for mitigating materials corrosion. In the present study, the development of …

Corrosion of steel in liquid lead (Pb) and lead-bismuth eutectic (LBE) is an important factor
when applying these materials as a process medium. At low oxygen content of the liquid …

The solubility of bismuth oxide (α-Bi2O3 (s); bismite) in near-neutral sodium perchlorate
solutions at 65 and 80° C, and pure water from 150 to 600° C, PSat to 800bar was studied …

Potentiometric oxygen sensors fabricated with yttria partially stabilized zirconia (YPSZ) and
a Bi/Bi2O3 reference electrode were tested in oxygen saturated lead–bismuth eutectic (LBE) …

The diffusivity of oxygen in liquid lead and lead–bismuth eutectic (LBE) alloy was measured
by a potentiostatic method and is given by log (DOPb/cm2s-1)=-2.554-2384/T (±0.070), 818 …

Surface oxidation can potentially influence transport properties of thermoelectric materials
and service performance of thermoelectric devices. Here, the oxidation mechanism of the …

BiCuTeO is a promising thermoelectric material owing to its intrinsically low thermal
conductivity and high carrier concentration. This study investigated the influence of …