Impingement/film cooling of C3X vane with double-wall cooling structure using air/mist mixture
R Zhang, C Luo, L Zhou, L Li, H Zhang, X Du - International Journal of Heat …, 2022 - Elsevier
This paper establishes a comprehensive vane model which includes a double-wall cooling
structure, with a C3X vane as the prototype and the air added with droplets as the coolant …
structure, with a C3X vane as the prototype and the air added with droplets as the coolant …
Analyzing the stress characteristics of glass as a function of cooling rate when applying air and mist for rapid cooling of glass heated to high temperatures
YS Kim, ES Jeon - Thermal Science and Engineering Progress, 2023 - Elsevier
When glass is heated to the softening point of 600–700℃ and then cooled rapidly,
compressive stress is generated on the glass surface, and residual tensile stress inside. The …
compressive stress is generated on the glass surface, and residual tensile stress inside. The …
Experimental investigation on boiling regime transformation when the binary-droplet impact on the superheated surface
This experimental study focuses on the phenomena induced by thermal effects after a two-
component droplet of propylene glycol water impinges on a hot substrate. The visualization …
component droplet of propylene glycol water impinges on a hot substrate. The visualization …
Accurate predictions of mist assisted film cooling characteristics and effectiveness on a flat plate with double-row holes
T Huo, J Xing, S Han, T Guo, L Li, X Du, R Zhang… - International Journal of …, 2024 - Elsevier
Improving the multi-row film cooling effectiveness of turbine vanes and blades is becoming
increasingly important, and the configuration design of the multi-row holes is becoming …
increasingly important, and the configuration design of the multi-row holes is becoming …
Characterization of loss, temperature, and stress on partial admission axial impulse turbines with liquid jet impingement cooling
H Wang, K Luo, L Kong, Y Xiao, K Qin - Applied Thermal Engineering, 2024 - Elsevier
The turbines for underwater applications can use abundant water as the cooling medium.
However, the use of liquid water is associated with the multi-phase and multi-physics …
However, the use of liquid water is associated with the multi-phase and multi-physics …
Fluid–Thermal–Structural Analysis of Partial Admission Axial Impulse Turbines With Liquid Jet Impingement Cooling
H Wang, K Luo, R Zhi, K Qin - Journal of …, 2023 - asmedigitalcollection.asme.org
Increasing turbine inlet temperature is beneficial to enhance turbine performance. However,
this also results in stringent cooling requirements. Unlike turbines in air cycle machines, the …
this also results in stringent cooling requirements. Unlike turbines in air cycle machines, the …
Grooving of CFRP with water mist jet–assisted nanosecond pulsed laser: effect of process parameters on removal mechanisms and HAZ formation
H Jiao, J Zhou, Y Huang, L Zhou, Z Lin, Y Long… - … International Journal of …, 2024 - Springer
Carbon fiber–reinforced plastic (CFRP) processed by laser acquires a large heat-affected
zone (HAZ) accompanied by mechanical corrosion due to overmelting and vaporization of …
zone (HAZ) accompanied by mechanical corrosion due to overmelting and vaporization of …