If there is one domain of civil engineering in which adhesives are currently booming, then it
is timber engineering. Natural adhesives have been used for centuries to structurally …

Understanding why wood bonds fail is an excellent route toward understanding how to
make them better. Certifying a bonded product usually requires achieving a specific load …

Adhesive bonding as an assembly procedure in aviation products is very efficient from both
weight and recurring cost points of view. However, even with strict inspections, process …

Due to the increasing interest in applying a wider range of wood species for structural
purposes, nine European softwood and hardwood species (ash, beech, birch, hornbeam …

Previous studies have proved that Larix kaempferi is a good material for preparing cross-
laminated timber (CLT), but under bending shear stress, CLT made by Larix kaempferi is …

Interest in the use of beech wood in construction is growing steadily. Considering its high
mechanical performance, it has a large potential to be used for the production of glued …

The purpose of this study was to determine the effect of surface roughness on bonding
strength in Oriental beech, cherry, Scots pine, and Taurus cedar woods. In conformance with …

Tests were conducted of the bonding shear strength of different bamboo configurations in
terms of grain direction, adhesive, and clamping pressure. The bonding shear tests were …

The objective of this study is to determine the effects of alkaline copper quaternary (ACQ)
treatment on the surface quality and bonding performance of four Malaysian hardwood …

Delamination resistance and tensile shear strength (TSS) are essential for load-bearing
timber structures. Thus these two factors were investigated on industrially bonded ash wood …