[HTML][HTML] Bond mechanism and bond strength of GFRP bars to concrete: A review

F Yan, Z Lin, M Yang - Composites Part B: Engineering, 2016 - Elsevier
Glass fiber-reinforced polymer (GFRP) reinforcements are taken as an alternative solution
for the deterioration of civil infrastructures. GFRP bars have received increasing attention …

An overview of bond behavior of recycled coarse aggregate concrete with steel bar

T Su, C Wang, F Cao, Z Zou, C Wang… - Reviews on Advanced …, 2021 - degruyter.com
In this paper, an overview focusing on the bond behavior of recycled coarse aggregate
concrete (RAC) with steel bar is carried out. The results show that the failure modes of RAC …

The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement

L Butler, JS West, SL Tighe - Cement and concrete research, 2011 - Elsevier
The purpose of this study was to investigate the influence that replacing natural coarse
aggregate with recycled concrete aggregate (RCA) has on concrete bond strength with …

Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete

PK Sarker - Materials and structures, 2011 - Springer
Geopolymer concrete (GPC) is an emerging construction material that uses a by-product
material such as fly ash as a complete substitute for cement. This paper evaluates the bond …

Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength

L Butler, JS West, SL Tighe - Construction and Building Materials, 2013 - Elsevier
This study evaluated the effect of fully replacing natural aggregate (NA) with several sources
of recycled concrete aggregate (RCA) on the various mechanical properties of multiple …

Non-proprietary bar splice sleeve for precast concrete construction

E Henin, G Morcous - Engineering structures, 2015 - Elsevier
Over the last few decades, the use of precast concrete components have been significantly
increasing in building and bridge construction due to their quality, durability, and speed of …

A novel support vector regression (SVR) model for the prediction of splice strength of the unconfined beam specimens

MS Ahmad, SM Adnan, S Zaidi, P Bhargava - Construction and building …, 2020 - Elsevier
Splice strength in reinforced concrete is an important parameter for the safe design of any
structure which should be assessed with ease and accuracy. Analytically the assessment of …

Unified bond stress–slip model for reinforced concrete

YF Wu, XM Zhao - Journal of Structural Engineering, 2013 - ascelibrary.org
Despite extensive investigations of bond stress versus slip modeling for RC structures, most
existing bond stress–slip models are incomplete, discontinuous, and insufficiently accurate …

Experimental study of early-age bond behavior between high strength concrete and steel bars using a pull-out test

D Shen, X Shi, H Zhang, X Duan, G Jiang - Construction and Building …, 2016 - Elsevier
High strength concrete (HSC) is used extensively in practice. However, HSC is prone to
cracking at early age, which can be the first step in a construction's deterioration and its …

[PDF][PDF] Effect of confinement of bond strength between steel

MH Harajli, BS Hamad, AA Rteil - ACI Structural Journal, 2004 - researchgate.net
The local bond aspect between steel bars and concrete confined with ordinary transverse
steel is experimentally investigated. The test parameters included diameter of reinforcing …