The effect of material orientation on void growth
N Hosseini, JC Nieto-Fuentes… - International Journal of …, 2022 - Elsevier
In this work, we have brought to light the effect of material orientation on void growth. For that
purpose, we have performed finite element calculations using a cubic unit-cell model with a …
purpose, we have performed finite element calculations using a cubic unit-cell model with a …
[HTML][HTML] Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy
This paper presents a novel calibration procedure of the modified Mohr-Coulomb (MMC)
fracture model by use of localization analyses and applies it for three tempers of an AA6016 …
fracture model by use of localization analyses and applies it for three tempers of an AA6016 …
[HTML][HTML] A gradient-based non-local GTN model: explicit finite element simulation of ductile damage and fracture
Non-local models have over the years been established as an effective approach to solve
the pathological mesh dependency problem observed in finite element simulation of strain …
the pathological mesh dependency problem observed in finite element simulation of strain …
Unit cell calculations under fully characterized stress states
C Tekoglu, B Koçhan - International Journal of Plasticity, 2022 - Elsevier
The available numerical methods for performing finite element unit cell calculations under
stress states evolving in a predefined manner restrict the most general stress state to a …
stress states evolving in a predefined manner restrict the most general stress state to a …
[HTML][HTML] Ductile failure predictions using micromechanically-based computational models
Three different micromechanically-based computational models for fracture in porous ductile
solids are compared and assessed. Model A is a unit cell model of a porous ductile solid …
solids are compared and assessed. Model A is a unit cell model of a porous ductile solid …
Ductile tearing of aluminium plates: experiments and modelling
This paper presents an experimental and numerical study on quasi-static ductile tearing of
thin plates of the aluminium alloy AA6016 in three tempers. Depending on the temper, the …
thin plates of the aluminium alloy AA6016 in three tempers. Depending on the temper, the …
A Lode-dependent Gurson model motivated by unit cell analyses
In this study, the effects of including a dependency on the third deviatoric stress invariant in
the void evolution equation of the Gurson model are examined using unit cell calculations …
the void evolution equation of the Gurson model are examined using unit cell calculations …
Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality
Aeronautical structures such as landing gears, wheels or turbine shaft are designed to
withstand predefined loadings corresponding to critical scenarios. This work addresses the …
withstand predefined loadings corresponding to critical scenarios. This work addresses the …
[HTML][HTML] Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading
An experimental and numerical study on the quasi-static loading of AlSi10Mg square boxes
produced by selective laser melting (SLM) was carried out. The goal was to evaluate the …
produced by selective laser melting (SLM) was carried out. The goal was to evaluate the …
[HTML][HTML] On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys
The influence of plastic anisotropy, yield strength and work hardening on ductile failure is
studied by nonlinear finite element simulations and strain localization analyses of tensile …
studied by nonlinear finite element simulations and strain localization analyses of tensile …