Isothermal and thermomechanical fatigue behavior of Ti-2Al-2.5 Zr titanium alloy
M Li, S Wang, J Yu, G Chen - International Journal of Fatigue, 2023 - Elsevier
In-phase and out-of-phase thermomechanical fatigue (TMF) tests in the temperature range
of 200–400° C and isothermal fatigue (IF) tests at 400° C were conducted to investigate …
of 200–400° C and isothermal fatigue (IF) tests at 400° C were conducted to investigate …
Experimental investigation of thermomechanical fatigue behavior in directionally solidified Ni-based superalloy under in-phase and out-of-phase conditions
HS Yun, JS Koo, P Jaeyeong, SH Nahm - Journal of Alloys and …, 2024 - Elsevier
The fatigue behavior of a directionally solidified (DS) Ni-based superalloy was investigated
under in-phase (IP) and out-of-phase (OP) thermomechanical fatigue (TMF) conditions …
under in-phase (IP) and out-of-phase (OP) thermomechanical fatigue (TMF) conditions …
On the microstructure evolution during isothermal low cycle fatigue of β-annealed Ti-6242S titanium alloy: Internal damage mechanism, substructure development and …
The present work deals with the room and high temperature microstructure evolutions of a
near alpha titanium alloy (Ti-6242S) during isothermal low cycle fatigue. The initial fully …
near alpha titanium alloy (Ti-6242S) during isothermal low cycle fatigue. The initial fully …
An experimental investigation on the progressive failure of an additively manufactured Laser Powder Bed Fusion Ti-6Al-4V aero-engine bracket under Low Cycle …
Abstract The Low Cycle Fatigue (LCF) performance of an aero-engine bracket in a 'struts
and connectors' design, made using the Laser Powder Bed Fusion (LPBF) process has …
and connectors' design, made using the Laser Powder Bed Fusion (LPBF) process has …
Evaluation of growth kinetics of aluminide coating layers on Ti-6Al-4V alloys by pack cementation and the oxidation behaviours of the coated Ti-6Al-4V alloys
Abstract Ti-6Al-4V (Ti64) alloy has excellent mechanical properties and corrosion
resistances, but poor oxidation properties at high temperatures. It is necessary to improve …
resistances, but poor oxidation properties at high temperatures. It is necessary to improve …
Effects of annealing temperature and quenching medium on microstructure, mechanical properties as well as fatigue behavior of Ti-6Al-4V alloy
N Davari, A Rostami, SM Abbasi - Materials Science and Engineering: A, 2017 - Elsevier
In this research, the effects of annealing temperature and quenching medium on
microstructure, mechanical properties as well as high cycle and low cycle fatigue behavior of …
microstructure, mechanical properties as well as high cycle and low cycle fatigue behavior of …
Fatigue life prediction considering conversion of mean stress for titanium alloy under multiaxial thermo-mechanical random loading
JJ Wang, DG Shang, WL Li, W Li, C Qian… - International Journal of …, 2024 - Elsevier
This paper presents a thermo-mechanical fatigue (TMF) life prediction method for titanium
alloy TA15 under multiaxial random amplitude loading. Through strain-controlled TMF tests …
alloy TA15 under multiaxial random amplitude loading. Through strain-controlled TMF tests …
[HTML][HTML] On the microstructural evolution and failure mechanism in laser powder bed fusioned Ti–6Al–4V during low cycle fatigue at room and elevated temperatures
Microstructural features and their evolution during cyclic deformation directly impact the low
cycle fatigue (LCF) life of additively manufactured Laser Powder Bed Fusion (LPBF) Ti–6Al …
cycle fatigue (LCF) life of additively manufactured Laser Powder Bed Fusion (LPBF) Ti–6Al …
Thermal-mechanical fatigue behavior and lifetime prediction of P92 steel with different phase angles
XM Pan, X Li, L Chang, GD Zhang, F Xue… - International Journal of …, 2018 - Elsevier
The influence of phase angle varying from 0°(in-phase, IP), 90°(clockwise diamond, CD)
and 180°(out-of-phase, OP) on thermal-mechanical fatigue behavior and lifetime of P92 …
and 180°(out-of-phase, OP) on thermal-mechanical fatigue behavior and lifetime of P92 …
Cyclic oxidation behavior of plasma surface chromising coating on titanium alloy Ti–6Al–4V
DB Wei, PZ Zhang, ZJ Yao, JT Zhou, XF Wei… - Applied surface …, 2012 - Elsevier
The cyclic oxidation behavior of plasma surface chromising coating on titanium alloy (Ti–6Al–
4V) was researched in air at 650° C, 750° C and 850° C. A NiCrAlY coating was prepared by …
4V) was researched in air at 650° C, 750° C and 850° C. A NiCrAlY coating was prepared by …