Based on the shape of the interface elongated bubble/liquid slugs and the liquid slugs'
aeration, the horizontal intermittent flow can be divided into three sub-regimes including …

Slug frequency, the number of liquid slugs passing through a point per unit of time, is an
intrinsic parameter that is used to characterize multiphase slug flows in pipes. In this review …

Abstract Background and Objective High-frequency chest wall compression (HFCC) therapy
by airway clearance devices (ACDs) acts on the rheological properties of bronchial mucus to …

The sudden increase in the operating pressure of nuclear power plants (NPPs) is due to the
water hammer phenomenon, which tends to produce a whipping effect that causes serious …

After hydrogen injected into a natural gas pipeline, the inner flow field of the pipeline will
change greatly and hydrogen may be locally enriched. This is an important reason for the …

A sustainable cutting method of Minimum Quantity Lubricant (MQL) was introduced to
promote lubrication effect and improve machinability. However, its performances are very …

Slug flow is a common flow pattern in pipelines that is often accompanied by undesirable
effects like vibrations, pressure loss, and corrosion. Since these effects correlate with slug …

Improvement of the separation efficiency of the phases at the slug catcher has been always
questionable. In this study, gas–liquid two-phase flow is simulated numerically in vessel …

This paper presents the simulation results for dielectric barrier discharge (DBD) at
atmospheric pressure in argon gas for different relative permittivity, granule shape, thickness …

Gas-liquid two-phase flows are encountered in different industrial applications such as,
chemical reactors, wastewater treatment, oil and gas exploration and nuclear reactors. In …