Determination of photovoltaic parameters of CIGS hetero junction solar cells produced by PLD technique, using SCAPS simulation program
In this study, CIGS ultrathin films of 52 nm, 89 nm, 183 nm and 244 nm thicknesses were
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …
Elaboration of spinel Co3O4 via cost-effective chemical spray pyrolysis for enhanced photo-response
Co 3 O 4 thin layers were produced through spray pyrolysis, varying the spray duration from
10 to 25 minutes. Various characterizations were employed to explore the impact of spray …
10 to 25 minutes. Various characterizations were employed to explore the impact of spray …
Solar and infrared light sensing comparison of Yb/CIGS photodiode
Abstract Glass/Mo/CIGS/Yb Schottky photodiodes were fabricated by the physical vapor
deposition method. The structural and morphological characterization of the CIGS layer on …
deposition method. The structural and morphological characterization of the CIGS layer on …
Comparison of electrical and photovoltaic parameters of the hetero-junction solar cells based on CZTS and CIGS ultrathin films
ABSTRACT Copper-Zinc-Tin-Sulphide (CZTS)/n-Si and Copper-Indium-Gallium-Selenide
(CIGS)/n-Si hetero-junction solar cells have been manufactured using Pulse Laser …
(CIGS)/n-Si hetero-junction solar cells have been manufactured using Pulse Laser …
Electrical and photoelectric properties of Yb/CIGS thin film Schottky photodiode
The electrical and photovoltaic properties of Yb/CIGS thin film Schottky photodiode were
studied. A low saturation current density of 3.2× 10− 9 A/cm 2 and a high zero-bias barrier …
studied. A low saturation current density of 3.2× 10− 9 A/cm 2 and a high zero-bias barrier …
Performance of Yb/p-CIGS Schottky Photodiodes at Low Temperatures
The Yb/p-Cu (InxGa) Se2 (CIGS) Schottky photodiodes were fabricated on Mo-coated glass
substrates. Structural and morphological characterizations of the CIGS on the Mo layer were …
substrates. Structural and morphological characterizations of the CIGS on the Mo layer were …
Thermal stability of perovskite solar cells incorporated with spiro-OMeTAD and an ionic liquid dopant
K Yamamoto, TN Murakami - Japanese Journal of Applied …, 2024 - iopscience.iop.org
Perovskite solar cells (PSCs) have garnered attention as novel photovoltaic devices due to
their cost-effectiveness, lightweight nature, and high photoconversion efficiency. To facilitate …
their cost-effectiveness, lightweight nature, and high photoconversion efficiency. To facilitate …
CIGS İnce Film Yüzeyindeki Morfolojik Farklılıkların GLCM Görüntü İşleme Yöntemi ile İncelenmesi
Çalışmada Mo folyolar ve cam üzerine DC saçtırma yöntemiyle kaplanmış Mo ince filmler
üzerine aynı anda termal buharlaştırma metoduyla CIGS yarıiletken malzemesi biriktirilmiştir …
üzerine aynı anda termal buharlaştırma metoduyla CIGS yarıiletken malzemesi biriktirilmiştir …
Comparison of Cu, Al, and Zr metallic contacts for chalcopyrite CIGS thin-film
Glass/Mo/CIGS was produced by the physical vapor deposition method and its
morphological and structural characterizations were performed. The forbidden band gap …
morphological and structural characterizations were performed. The forbidden band gap …