The influence of direct current pulse on–off patterns on spark plasma sintering of ZrB 2 on
densification, mechanical and tribological properties has been investigated systematically …

Abstract (Cr 0.5 Al 0.5) 1− x Si x N coatings with Si contents from 0 at.% to 11.5 at.% were
deposited on Inconel 718 substrates by RF magnetron co-sputtering. In the ball-on-disc …

ZrB2–SiC composites were prepared by hot pressing with different sources of SiC to study
the effect of SiC with different morphology on densification, microstructure, phase …

The effect of addition of submicrometer‐sized B 4 C (5, 10 and 15 wt%) on microstructure,
phase composition, hardness, fracture toughness, scratch resistance, wear resistance, and …

High ceramic yield, fast curing rate and high purity are essential for ceramic precursors. In
this study, a SiC ceramic precursor-polycarbosilane containing both allyl group and acrylate …

ZrB 2-SiC composites were hot pressed at 2473 K (2200° C) with graded amounts (5 to 20
wt pct) of SiC and the effect of the SiC addition on mechanical properties like hardness …

Organic coatings have good mechanical properties and high corrosion resistance, but their
poor tribological properties limit their application on transmission components, such as …

The authors develop a protective transparent coating of aluminum oxide through direct
oxidation of aluminum‐coated glass. Aluminum coatings are deposited on low‐iron glass …

Lined and grating grooves have been fabricated on a large scale engineering Al alloy plate
via a simple, convenient, efficient, and low cost laser marking method. Scanning electron …

The microhardness characteristics of 3C–SiC/Si films grown by vapor phase epitaxy were
investigated using Vickers and Knoop indenters. The observed hardness behavior at lower …