Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP)
AS Khan, CS Meredith - International Journal of Plasticity, 2010 - Elsevier
The thermo-mechanical responses of Al 6061 before and after equal channel angular
pressing (ECAP) at different strain rates and temperatures were measured. Al 6061 was …
pressing (ECAP) at different strain rates and temperatures were measured. Al 6061 was …
Effects of initial grain size on hot deformation behavior of commercial pure aluminum
The effects of initial grain size of commercial pure aluminum on hot deformation behavior
were investigated using hot compression tests. The hot compression tests were carried out …
were investigated using hot compression tests. The hot compression tests were carried out …
Numerical modeling of dual phase microstructure behavior under deformation conditions on the basis of digital material representation
Abstract Development of a digital material representation (DMR) model of dual phase steel
is presented within the paper. Subsequent stages involving generation of a reliable …
is presented within the paper. Subsequent stages involving generation of a reliable …
Mechanical properties of ultra fine-grained HSLA and Ti-IF steels
J Majta, K Muszka - Materials Science and Engineering: A, 2007 - Elsevier
To study strengthening phenomena in ultra fine structures of metals we employed the
MaxStrain system to analyze the correlation between parameters of thermomechanical …
MaxStrain system to analyze the correlation between parameters of thermomechanical …
Multi-axial forging of Fe3Al-base intermetallic alloy and its mechanical properties
Tri-axial plane-strain forging was applied to the Fe–28Al–5Cr–0.8 Zr–0.04 B intermetallic
alloy, in order to study its grain refinement and possible improvement in mechanical …
alloy, in order to study its grain refinement and possible improvement in mechanical …
Experimental and modelling study of the grain refinement of Fe-30wt% Ni-Nb austenite model alloy subjected to severe plastic deformation process
DS Svyetlichnyy, J Majta, R Kuziak… - Archives of Civil and …, 2021 - Springer
This study addresses some aspects regarding a computer modelling based on three-
dimensional Frontal Cellular Automata (FCA) for the simulation of ultrafine-grained (UFG) …
dimensional Frontal Cellular Automata (FCA) for the simulation of ultrafine-grained (UFG) …
Study of the effect of grain size on the dynamic mechanical properties of microalloyed steels
K Muszka, PD Hodgson, J Majta - Materials Science and Engineering: A, 2009 - Elsevier
In the present paper the effect of grain refinement on the dynamic response of ultra fine-
grained (UFG) structures for C–Mn and HSLA steels is investigated. A physically based flow …
grained (UFG) structures for C–Mn and HSLA steels is investigated. A physically based flow …
A dislocation density-based model for the work hardening and softening behaviors upon stress reversal
P Lisiecka-Graca, K Bzowski, J Majta… - Archives of Civil and …, 2021 - Springer
The mechanical behaviours of microalloyed and low-carbon steels under strain reversal
were modelled based on the average dislocation density taking into account its allocation …
were modelled based on the average dislocation density taking into account its allocation …
Simulation numérique, à l'aide d'algorithmes thermomécaniques implicites, de matériaux endommageables pouvant subir de grandes vitesses de déformation …
PP Jeunechamps - 2008 - orbi.uliege.be
La thèse de Monsieur Jeunechamps est intitulée «Simulation numérique, à l'aide
d'algorithmes thermomécaniques implicites, de matériaux endommageables pouvant subir …
d'algorithmes thermomécaniques implicites, de matériaux endommageables pouvant subir …
Development of the multi-scale model of cold rolling based on physical and numerical investigation of ferritic–pearlitic steels
R Kuziak, M Mroczkowski, K Perzyński, W Libura… - Archives of Civil and …, 2015 - Elsevier
With the aim of developing dual phase (DP) microstructure using a continuous annealing
process, four steels with different chemical compositions were investigated in the …
process, four steels with different chemical compositions were investigated in the …