In the pursuit toward achieving dry cutting, air machining, minimum quantity lubrication
(MQL), and cryogenically cooled machining are the stepping stones. Nevertheless …

The current research work demonstrates through experiment, the effect of solid lubricant
assisted minimum quantity lubrication (MQL) turning of Inconel 718 on the finish quality of …

This paper simulated through-tool minimum quantity lubrication (MQL) to characterize
micromist droplet size and distribution. The effect of nozzle surface roughness and air …

In metal machining, a large amount of heat is generated which significantly affects the
machining performance, and therefore, a suitable cooling/lubricating strategy is required to …

Microgroove array with different parameters was fabricated on the rake face of the cemented
carbide tools by a fiber laser. The experiments of orthogonal cutting of Ti-6Al-4V titanium …

Minimum quantity lubrication (MQL) technique has been widely used in different machining
processes. However, oil mist discharged from MQL system induces negative effects for …

This paper mainly focuses on determination of optimum minimum quantity lubrication (MQL)
parameter settings due to enhance the machinability of Ti–6Al–4V alloy, which is an area of …

This paper compares experimental and numerical simulations of liquid film formation for
different rotating velocities of a milling tool. The numerical model used was based on an …

微量润滑技术作为一种典型的绿色冷却润滑方式, 近年来逐渐受到科学界和产业界的重视.
而目前在微量润滑技术工程化应用中, 由于机理研究的缺乏, 在加工工艺参数的选择上始终存在 …

Cryogenic machining is seen as a possible solution to increase tool life and improve surface
integrity of machined components, by efficiently removing the heat from the cutting zone …