On the solidification characteristics, deformation, and functionally graded interfaces in additively manufactured hybrid aluminum alloys
AlSi10Mg powder is deposited on top of a cast AA2618 substrate via laser powder bed
fusion technique to form hybrid aluminum parts for additive repair purposes. The …
fusion technique to form hybrid aluminum parts for additive repair purposes. The …
On-line melt pool temperature control in L-PBF additive manufacturing
H Rezaeifar, MA Elbestawi - The International Journal of Advanced …, 2021 - Springer
Laser powder bed fusion is a promising additive manufacturing technology which has
enabled the fabrication of complex-shape, custom-designed, and cost-effective parts with no …
enabled the fabrication of complex-shape, custom-designed, and cost-effective parts with no …
[HTML][HTML] Thermal stability of Al–Fe–Ni alloy at high temperatures
Abstract The Al–Fe–Ni eutectic alloy was produced by gravity cast, and the thermal stability
of this eutectic alloy was studied for the first time in this work. The phase composition was …
of this eutectic alloy was studied for the first time in this work. The phase composition was …
[HTML][HTML] Regulating microstructures and mechanical properties of Al–Fe–Ni alloys
Abstract Mechanical properties of Al–Fe–Ni eutectic alloys have been investigated based on
the nominal mass fraction of eutectic phase, and the added Fe/Ni mass ratio. The X-Ray …
the nominal mass fraction of eutectic phase, and the added Fe/Ni mass ratio. The X-Ray …
The effects of microstructure and growth rate on microhardness, tensile strength, and electrical resistivity for directionally solidified Al–Ni–Fe alloys
Directional solidification of eutectic alloys attracts considerable attention because of
microhardness, tensile strength, and electrical resistivity influenced by eutectic structures. In …
microhardness, tensile strength, and electrical resistivity influenced by eutectic structures. In …
The correlation of microstructure features, dry sliding wear behavior, hardness and tensile properties of Al-2wt% Mg-Zn alloys
The effect of Zn addition on the as-cast microstructures, mechanical properties and dry
sliding wear behavior of Al-2wt% Mg-Zn alloys is investigated in this study. Two Al-Zn-Mg …
sliding wear behavior of Al-2wt% Mg-Zn alloys is investigated in this study. Two Al-Zn-Mg …
The effects of microstructure and intermetallic phases of directionally solidified Al–Fe alloys on microhardness
Iron is the dominant impurity in Al of commercial grade purity and is also added deliberately
in some Al alloys compositions to improve the high temperature strength. Al–Fe castings …
in some Al alloys compositions to improve the high temperature strength. Al–Fe castings …
Interrelation of cell spacing, intermetallic compounds and hardness on a directionally solidified Al–1.0 Fe–1.0 Ni alloy
Abstract Al–Fe–Ni alloys show very promising properties for applications in industrial
furnaces and petrochemical plants. Mechanical strength and corrosion resistance are …
furnaces and petrochemical plants. Mechanical strength and corrosion resistance are …
Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy
J Fan, J Liu, S Tian, S Wu, S Wang, H Gao… - Journal of alloys and …, 2015 - Elsevier
Microstructural characteristics and mechanical properties of Ti–49Al (at.%) alloy was
investigated by directional solidification technology under different solidification parameters …
investigated by directional solidification technology under different solidification parameters …
The effects of dendritic arm spacing (as-cast) and aging time (solution heat-treated) of Al–Cu alloy on hardness
The influences of dendritic arm spacing (as-cast condition) and aging times (solution treated
condition) of a hypoeutectic Al–Cu alloy on hardness are analyzed in the present study. The …
condition) of a hypoeutectic Al–Cu alloy on hardness are analyzed in the present study. The …