The change in the trends of mechanical behavior and martensite formation of austenitic
steels versus grain size has not yet been explained for the coarse-grained regime …

The deformation responses of NiCoCrFe high-entropy alloy (HEA) under quasi-static (1×
10− 4-1× 10− 1/s) and dynamic (1,000–6,000/s) tension were investigated. A good …

Low, intermediate and high strain rate tensile experiments are carried out on flat smooth,
notched and central-hole tensile specimens extracted from advanced high strength steel …

A heterostructured medium Mn steel with duplex phases (ferrite and austenite) and multiple
morphologies (lath-typed and granular) is fabricated by a novel two-stage warm rolling …

The current work aims to predict the work-hardening behaviour of dual-phase (DP) steel,
focusing on the effect of transformation-induced geometrically necessary dislocations …

The uniaxial quasi-static and dynamic tensile tests were conducted at different strain rates
(10–3 s− 1, 800 s− 1, 1900 s− 1 and 2900 s− 1) for 7050-T7451 aluminum alloy. Then …

The additional deep cryogenic treatment process prior to intercritical annealing was
employed to tailor the mechanical stability of austenite grains in a new medium Mn steel. As …

A microstructure-based approach by means of representative volume elements (RVEs) is
employed to evaluate the flow curve of DP steels using virtual tensile tests. Microstructures …

In this study, the dynamic compressive response behavior of a body-centered cubic (BCC)
single-phase TiZrNbV refractory high-entropy alloy (RHEA) was investigated under impact at …

Abstract Ultra-high strength (> 1 GPa) dual-phase (DP) steels have been extensively
investigated in literature. Yet, the damage tolerance of these DP steels remains mostly …